Results 1 to 8 of 8

Thread: Deck Oiling

  1. #1
    Join Date
    Apr 2007
    Location
    Perth
    Age
    50
    Posts
    0

    Default Deck Oiling

    Hi

    I am planning on re-oiling my deck on the weekend.
    It was laid Mid-Feb this year but with the Western Australian heat of summer it needs re-doing.

    My question is: what is the best way to prepare the deck and apply the oil?

    I am thinking of hoising it down tonight, then sweeping the deck tommorrow morning and then applying the oil with a paintbrush.

    The only problem is that kneeling down on the deck and applying it will take forever and by the end I am sure my knees will be killing me.

    Any suggestions as to the prep work and applying it and making it easier would be greatly appreciated.

  2. #2
    Join Date
    Jul 2004
    Location
    Singleton NSW
    Age
    69
    Posts
    33

    Default

    Arry,

    When I was researching what finish I would use on my deck I was concerned about the amount of time to oil and having to do it every few months.
    I find a quick going over with a high pressure washer and then I use a cabots deck pad and it takes me about 20 minutes to 'mop' on the oil.

    Regards
    woodcutta

  3. #3
    Join Date
    Mar 2006
    Location
    Sydney, NSW
    Posts
    0

    Default

    Quote Originally Posted by Arry View Post
    what is the best way to prepare the deck and apply the oil?

    I am thinking of hosing it down tonight, then sweeping the deck
    tomorrow morning and then applying the oil with a paintbrush.
    Depends how dirty the deck is. Take a damp rag or paper towel and rub it
    over a small section. If plenty of dirt comes off, then simple hosing and
    sweeping won't be adequate. You'll need to clean it properly with napisan
    and oxalic acid (search back through this forum for details).

    Then you need to let the deck become absolutely bone dry before applying
    the oil. I.e: several sunny days or more (as an absolute minimum). In
    autumn/winter this can get a bit tricky if dew keeps condensing on the
    deck overnight.

    [...] kneeling down on the deck and applying it will take forever
    and by the end I am sure my knees will be killing me. [...]
    The standard technique is to use sheepskin on the end of a pole.
    Bunnings sells these. You'll also need a roller tray, or whatever, to dip
    it in. Importantly, apply the oil very sparingly. Press the sheepskin on the
    tray so it's not carrying too much oil. Then apply it carefully over a large
    section. (I find that gently dabbing it over the section, and then going back
    over to spread it out, gives more even coverage that's not too excessive.)

    In the past, I've regarded the sheepskin as a throwaway (single-use) item,
    because cleaning it is a pain. But they're a bit too expensive for that.
    Recently, I noticed Bunnings have a cheap "pad painter" device where the
    pad is replaceable, somewhat cheaper than sheepskin (and hence easier
    to view as single-use). The device allows swivel, and is designed to screw
    onto the end of a pole. You can get a relatively cheap aluminium extension
    pole from Bunnings also. Both items are useful for other things
    (e.g: painting high places). Also, having an extension pole means that you
    can wipe the (drained) pad back over the deck after 30 mins or so to remove
    any excess oil off the top. For best results, do one coat like this that's allowed
    to soak in, then remove the top excess as much as you can. Allow to dry for
    several days and then repeat.

  4. #4
    Join Date
    Apr 2007
    Location
    Perth
    Age
    50
    Posts
    0

    Default

    many thanks guys, greatly appreciated

    Looks like I am making yet another trip to Bunnings

    I think I almost live there lately

  5. #5
    Join Date
    Dec 2003
    Location
    Frankston-Langwarrin VIC
    Age
    61
    Posts
    280

    Default

    Quote Originally Posted by strangerep View Post
    Depends how dirty the deck is. Take a damp rag or paper towel and rub it
    over a small section. If plenty of dirt comes off, then simple hosing and
    sweeping won't be adequate. You'll need to clean it properly with napisan
    and oxalic acid (search back through this forum for details).

    Then you need to let the deck become absolutely bone dry before applying
    the oil. I.e: several sunny days or more (as an absolute minimum). In
    autumn/winter this can get a bit tricky if dew keeps condensing on the
    deck overnight.

    The standard technique is to use sheepskin on the end of a pole.
    Bunnings sells these. You'll also need a roller tray, or whatever, to dip
    it in. Importantly, apply the oil very sparingly. Press the sheepskin on the
    tray so it's not carrying too much oil. Then apply it carefully over a large
    section. (I find that gently dabbing it over the section, and then going back
    over to spread it out, gives more even coverage that's not too excessive.)

    In the past, I've regarded the sheepskin as a throwaway (single-use) item,
    because cleaning it is a pain. But they're a bit too expensive for that.
    Recently, I noticed Bunnings have a cheap "pad painter" device where the
    pad is replaceable, somewhat cheaper than sheepskin (and hence easier
    to view as single-use). The device allows swivel, and is designed to screw
    onto the end of a pole. You can get a relatively cheap aluminium extension
    pole from Bunnings also. Both items are useful for other things
    (e.g: painting high places). Also, having an extension pole means that you
    can wipe the (drained) pad back over the deck after 30 mins or so to remove
    any excess oil off the top. For best results, do one coat like this that's allowed
    to soak in, then remove the top excess as much as you can. Allow to dry for
    several days and then repeat.

    This guy's (strangerep) a gun! Follow this advice and you won't go too far wrong.

  6. #6
    Join Date
    Dec 2005
    Location
    Western Australia
    Posts
    190

    Default

    There is also available a Wagner Deck Oiler. It has a little reservoir that you fill with oil, then run it over the deck. This saves going back and dipping the applicator all the time.

    I haven't used one yet, but they do look pretty good.

    I would be interested in any feedback if anyone else has used one.

  7. #7
    Join Date
    Apr 2007
    Location
    Perth
    Age
    50
    Posts
    0

    Default

    Well I have oiled my deck and it looks fantastic
    Many thanks to those of you who posted advice.
    I went to Bunnings and bought a pole and then bought a flat sponge like device that was made for decks and attached that to the pole.

    Made it so much easier and simpler.

    Question: Should I do another coat and if so when?
    Pitty, I did the coat yesterday and about 24 hours later it is pouring with rain.

    At least it had 24 hours to dry a little.

  8. #8
    Join Date
    Mar 2006
    Location
    Sydney, NSW
    Posts
    0

    Default

    Quote Originally Posted by Arry View Post
    Should I do another coat and if so when?
    In the first year, there's a rule of thumb to re-oil every 3 months or so.
    Then you can drop back to every 6 months (to keep it looking nice),
    or 12 months if you don't have enough spare time. )
    But.... this assumes the deck was weathered and cleaned properly.

    From your first post, I gather the first coating was back in mid-Feb?
    Actually, I also got the impression that you constructed the deck then,
    and oiled very soon thereafter. Is that correct, or have I misunderstood?

    If you oiled it immediately, that was a mistake - but it's done now.
    I made exactly the same mistake, and found that as I kept applying further oil
    coats, the tannins and extractives kept rising underneath the oil. After
    about 6-9 months it started looking really crap, even though I was applying
    more oil. So I didn't have much choice but to let the oil break down
    by weathering extensively over summer, then hit it with high pressure
    water cleaner, napisan, etc, and re-oil.

Similar Threads

  1. Oiling My Deck
    By Arry in forum DECKING
    Replies: 0
    Last Post: 20th April 2007, 01:24 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •