Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Bakelite Fittings
-
11th April 2007, 10:34 AM #1
SENIOR MEMBER
- Join Date
- Feb 2006
- Location
- Melbourne
- Age
- 65
- Posts
- 499
Bakelite Fittings
Hi,
Can anyone shed some light on whether bakelite fittings (especially plugs on 3 phase equipment) are illegal in Victoria or not?.
Thanking those in advance of their replies
.
Cheers
MH
-
11th April 2007, 06:36 PM #2
Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
Bakelite is old 1950/60's gear, just for peace of mind I would be changing them if it was on my equipment.
It also means the chord is that old crumbly rubber too.
Al
-
11th April 2007, 11:03 PM #3
SENIOR MEMBER
- Join Date
- Feb 2006
- Location
- Melbourne
- Age
- 65
- Posts
- 499
Hi Al,
Originally Posted by ozwinner
Bakelite is old 1950/60's gear, just for peace of mind I would be changing them if it was on my equipment.
It also means the chord is that old crumbly rubber too.
Al
Unfortunately the equipment in question are at my workplace not my house
. I have written to the appropriate Government department this afternoon to find out whether they should be replaced?.
Cheers
MH
Similar Threads
-
Replacing Old Tap Fittings
By beej75 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 4Last Post: 12th January 2006, 01:04 PM
