![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Fibreglass fishpond question
-
7th April 2007, 07:28 PM #1
Fibreglass fishpond question
My goldfish pond, which was built with big rocks and concrete, had a plastic/vinyl type liner, but after one of the wallabies knocked some rocks in off the edge, the liner got holed and started to leak.
I removed the old liner and made up a render type mix and smoothed the inside surface, then fibreglassed a shell inside the pond, I will be putting on the flowcoat tomorrow.
My question is, will I have to wait a few days or longer for the stuff to cure properly, or can I fill it up with water once the stuff goes hard?
Another concern is the vapors/solvents, will they be harmfull to the fish if its not cured enough ?
Any thoughts on this welcome.
Similar Threads
-
Two-part Question
By Rodgera in forum JOKESReplies: 1Last Post: 12th May 2006, 07:17 PM