![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 12 of 12
Thread: paint removal
-
13th March 2004, 04:40 PM #1
Senior Member
- Join Date
- Jul 2003
- Location
- rural qld
- Age
- 67
- Posts
- 139
paint removal
working on the old house ( just bought ) has pressed metal ceilings in like new condition apart from 80 yrs of paint flaking off been angle grinding with brush to remove paint but just blew up the grinder after only one sml bedroom and 1/3 of lounge ( 28ft by 16 ft rm ) so still alot to go have thought of hitting it with high pressure air to blast off the loose stuff do u think this might work
thought of sand blaster but cant get one here in town have to go 135k to get and at $ 180 a day plus a hire for a large compressor to work it cant really see the cost effect in doing that as not all the paint needs to come off
t5hks david
-
13th March 2004, 05:11 PM #2
sandblasting is probably overkill as the tin is only around .5 mm
compressed air might be ok but again, take care as any rusted sections, which may be invisible will just explode - also you run the real risk of damaging/denting the tin. Any irrepairable damage will mean replacement of the sheets and it is becoming extremely hard to locate in original or even accurate-reproduction forms.
probably a very silly question, but have you tried a normal broom or similar? Just thinking that if the paint is flakey it may not need much to get it off and once those bits are gone it may be fine to paint straight over what's left.....?
sorry I havent been able to help .....
hows your arms?bloody tired I bet
Steve
Kilmore (Melbourne-ish)
Australia
....catchy phrase here
-
13th March 2004, 05:21 PM #3
Supermod
- Join Date
- Jul 1999
- Location
- Brisbane, Qld.
- Age
- 48
- Posts
- 579
go and buy one of them $19 angle grinders Bunnies have at the moment....
-
13th March 2004, 10:34 PM #4
Senior Member
- Join Date
- Jul 2003
- Location
- rural qld
- Age
- 67
- Posts
- 139
as said has 80 yrs of paint on it so the detail is dissappearing in the ceiling so was mainly rubbing back to get rid of all the loose stuff and also to bring out the pattern again by removing some of those coats am not trying to take it all back to bare metal to hard for that lol
yes the arms are getting a bit sore 12ft high ceilings so up and down the ladder all the time as well have scaffolding but just dont feel comfortable on it think the ladder is there in front of me but on the scaffolding am just up in the air lol
super cheap had angle grinders even cheaper $17 so bought one if it last 6 months cant go wrong and also means my good one wont get stuffed with the use
have been offered a high pressure air cleaner noosle to fit on compressor so will give that a burl first on my little compressor see if it dose anything if not can get a much bigger ( comerical size ) compressor and wil try that
will let u know what happens
thanks for the feed back
david
-
14th March 2004, 05:26 PM #5
bets of luck with it all
take care as the paint may be FULL of lead - I know how hot it gets up there, being from those parts, but a face mask is probably a must
would totally LOVE to see some pics of the home and your projects!Steve
Kilmore (Melbourne-ish)
Australia
....catchy phrase here
-
14th March 2004, 05:31 PM #6
Have you considered paint stripper?
-
14th March 2004, 10:38 PM #7
Senior Member
- Join Date
- Jul 2003
- Location
- rural qld
- Age
- 67
- Posts
- 139
well posted a pic on here
under the new hse if u want to have a look
thks david
-
14th March 2004, 11:03 PM #8
have you thaught of a paint scraper?
-
16th March 2004, 09:57 AM #9
Senior Member
- Join Date
- Mar 2004
- Age
- 77
- Posts
- 151
Silly question, I suppose, but have you tried washing it?
Some of our "flaky paint" was kalsomine which comes off with a scrubbing brush (toothbrush for the fiddly bits) and soapy water.
Wouldn't hurt to try a patch.
-
21st March 2004, 10:46 PM #10
Senior Member
- Join Date
- Jul 2003
- Location
- rural qld
- Age
- 67
- Posts
- 139
well all but a 12x6 section is now done after all my trials ( pressure spary etc ) the angle grinder with wire brush worked the best
never even thought to just try and wash it
used 3 brushes up and one angle grinder so and took about 3 days all up ( it is a large ceiling ,pressed metal , thoughout the whole hse )
thks david
-
21st March 2004, 11:16 PM #11
Well done mate!
man, I can feel your arms "singin" from here
Did you manage to salvage the entire ceiling?Steve
Kilmore (Melbourne-ish)
Australia
....catchy phrase here
-
22nd March 2004, 10:09 PM #12
Senior Member
- Join Date
- Jul 2003
- Location
- rural qld
- Age
- 67
- Posts
- 139
yeah saved it all its in really good condition some of it came up like new just out of the shop hardly any rust thru at all so was very pleased
and yes i am aching in the arms lol