Results 1 to 4 of 4
Thread: Paving costs - Melbourne
-
15th March 2007, 08:56 PM #1
Paving costs - Melbourne
I've been quoted $100 per square meter (70 m2 total) to remove some old paving (on sand bed only), excavate and remove/dump soil, lay 100mm concrete base and re-pave using existing pavers.
Access down the side of the house is suited for a dingo only, and the machine owner has a dingo, bobcat, tipper setup.
Quote includes removing existing sleeper garden edge (@20m worth), and a hot water system while job is being done, then replacing.
Does the cost sound about right for Melbourne?
As always, assistance gratefully received.
-
15th March 2007, 09:07 PM #2
We recently paid $50.00 m2 to lay pavers (+ roadbase and sand). Prep work was mostly done already but would have been an additional $30.00 m2 if required. Pavers were seconds at about $20 m2. (Approx 80m2 total).
So for your scope we were paying about $80 m2 so $100 isn't bad.Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.
-
15th March 2007, 09:10 PM #3Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
Clinton I would say its a good price seeing as how that they have to rip up and relay, plus all the other work involved..
Al
-
15th March 2007, 09:33 PM #4
Thanks fella's.
I thought it wasn't too bad... just that over 70 m2, its a large overall price. More $ than I normally see in a long time.
Increase the value of the house and make it look nice for the missus (this area is her pet hate) vs put $7000 in to shares and some machines..... bugger!
Similar Threads
-
Per stump costs Melbourne
By cruncher_qpr in forum FLOORING, DECKING, STUMPS, etc.Replies: 8Last Post: 5th January 2007, 03:53 PM -
Melbourne - Tops The World For Sports
By Metal Head in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 15Last Post: 13th November 2006, 03:55 PM
Bookmarks