Results 1 to 11 of 11
  1. #1
    Join Date
    Dec 2004
    Location
    Perth
    Posts
    60

    Default Tile removal - concrete grinder??

    I am currently removing about 60 sqmtr of ceramic tiles. The tiles are coming up ok but leaving a very hard, ridged concrete like residue behind. This is proving almost impossible to remove with a small jackhammer. Would a concrete grinder be the way to finish these floors??

    Any help greatly appreciated and any idea of cost involved??

    Cheers Stu

  2. #2
    Join Date
    Feb 2007
    Location
    Perth
    Age
    47
    Posts
    7

    Default

    Stu,

    What room are the tiles in? Bathroom, kitchen .. ? I am currently removing bathroom floor tiles and have found the screed is relatively easy to remove with a rotatary hammer drill that I purchased from bunnings recently - here is a link to it if you want to take a look - http://www.ozito.com.au/productinfo....odid=OZRH1100A

    Cost was $99, it came with a chisel bit which is perfect for the job. Hope this helps.

    Cheers,
    Nigel

  3. #3
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    I used the legendary $69 Ozito rotary hammer drill from Bunnies with the wide spade bit out of the $25 Medalist set also form Bunnies.
    Took it off rotary & used just hammer tipped over at about 45°, pulled the trigger & followed it accross the floor.
    It did a very good job of lifting the tiles & chipping the old tile cement off the concrete.
    I had about 36sqM of ceramic & slate to get rid of.
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  4. #4
    Join Date
    Oct 2002
    Location
    Brisbane, QLD, Australia
    Age
    47
    Posts
    0

    Default

    Stu,

    I'm in the same boat here too. Dunno what the original builder used to glue these bloody tiles down but I had to use a heavy Hitachi jackhammer to lift them, and 90% of them just crumbled when touched making removal a nightmare. And in some case the tiles lifted off a small layter of the concrete floor in the process. I'm starting to think the builders skimped and used concrete instead of tile adhesive

    Anyway all the "adhesive" or whatever they used is still on the floor, complete with intact notched trowl pattern

    I think we will hire a concrete grinder with diamond wheel to try remove it all and get the surface level for re-tiling.

    What a nightmare!
    How much wood could the woodchuck chuck if the woodchuck could chuck wood?

  5. #5
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    2,869

    Default

    The residue is probably a "flexible" adhesive, which is why it's such a cow to remove.

    If you are incredibly patient, it will scrape off with a sharp shovel, but hey, I'd go for the grinder myself!

    Cheers,

    P

  6. #6
    Join Date
    Dec 2004
    Location
    Perth
    Posts
    60

    Default

    I am retiling kitchen, laundry, hallway and dining room. The residue looks like concrete and is very hard and in ridges. Will try a wider chisel and see how that works.
    Cheers Stu

  7. #7
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    Are you tipping it over at an angle?
    I found less than 45° was needed some times.
    There were places that the wide spade bit actually dug into the concrete under the tile cement but the tiler didn't care about dents in the floor, he just filled the with glue. He was more worried about bumps than dents.
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  8. #8
    Join Date
    Aug 2004
    Location
    Brisbane
    Posts
    777

    Default

    Sounds like cement based tile adhesive to me. The grinder may be one option but you can also get a floor tool attachment for the jack hammer that is designed for the job. It is a wide steel blade maybe 150-200mm wide.

    Cheers
    Michael

  9. #9
    Join Date
    Feb 2007
    Location
    Perth
    Age
    47
    Posts
    7

    Default

    Quote Originally Posted by mic-d View Post
    Sounds like cement based tile adhesive to me. The grinder may be one option but you can also get a floor tool attachment for the jack hammer that is designed for the job. It is a wide steel blade maybe 150-200mm wide.

    Cheers
    Michael

    Where can I buy one of these?

  10. #10
    Join Date
    Jan 2005
    Location
    Newcastle/Tamworth
    Posts
    416

    Default

    Hey Stu,
    This is probably the residue from the old method of glueing tiles, sprinkle neat cement onto a damp bed of sand cement and place the tiles on top.

    I just used a very thin layer of self levelling compound to fill the depressions, you will have to thin it quite a lot though, a lot quicker than trying to get it perfectly flat with the rotary hammer. I filled the depressions so just a few peaks were visible, these were not a problem with a decent adhesive bed.

    Cheers
    Pulse

  11. #11
    Join Date
    Dec 2004
    Location
    Perth
    Posts
    60

    Default

    Thanks for your help all, just spent three days solid on these floors and now have 60 sq mtrs cleaned up and ready to go. Looking forward to the tiling a lot more than taking the old ones up thats for sure.
    Cheers Stu

Similar Threads

  1. deck ontop of concrete steps
    By oricenap in forum CONCRETING
    Replies: 2
    Last Post: 25th June 2007, 09:25 PM
  2. Spraying concrete tile roof
    By Stu in forum PAINTING
    Replies: 8
    Last Post: 2nd December 2006, 04:17 PM
  3. Floor Tile Removal
    By Stu in forum FLOORING
    Replies: 8
    Last Post: 7th July 2005, 11:08 PM
  4. Concrete over concrete
    By Sir Stinkalot in forum CONCRETING
    Replies: 4
    Last Post: 18th July 2003, 10:59 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •