Page 2 of 12 FirstFirst 1234567 ... LastLast
Results 16 to 30 of 171
  1. #16
    Join Date
    Sep 2006
    Location
    Barossa Valley SA
    Posts
    38

    Default

    [quote=rufflyrustic;465738]Obituary of the Solar Kiln
    It is with deep regret (NOT!) that I wish to advise you all that the Solar Kiln passed on to its new home on Sunday, 18 February 2007.


    Don't worry Wendy, the Solar Kiln lives on, at my place. I mostly work in the carport, because the shed is only a temperate zone for about one week a year... and The Big Muscly Bloke has the garage to himself, for one strange old Russian motorbike that has so far taken 7 years to restore........
    "Look out! Mum's in the shed and she's got a hammer!"

  2. #17
    Join Date
    Sep 2005
    Location
    melbourne SEAFORD
    Age
    61
    Posts
    0

    Default

    I dont see a lathe in all that aaaa accumulation . so where did you hide it.
    insanity is a state of mind if you don't mind it does not matter.

  3. #18
    Join Date
    Nov 2003
    Location
    Sydney
    Age
    54
    Posts
    891

    Default

    Wendy, don’t forget to take make room for your washing machine.

    Sorry it is a bad joke.
    Visit my website at www.myFineWoodWork.com

  4. #19
    Join Date
    Jun 2004
    Location
    Canberra
    Age
    45
    Posts
    314

    Default

    Yer Im with the others wendy,

    Go and hire a small jack hammer for half a day... wont cost much and it will break up like butter.... took me less than an hour to break up my old small slab where my new shed now stands. Easy peasy....

    Either that, or give the big bloke in the pics a FBSH and tell him to go nuts...
    maybe paint a picture of George Bush (or some other tosser) on the slab for incentive
    I want to die peacefully in my sleep like my grandfather, not screaming in terror like the passengers in his car.

  5. #20
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    3,491

    Default

    Well, between all of us, I reckon we could blow it up with AlexS' Big Reds, then clean it up with DavidG's rig and then kick back with our feet up on the washing machine.


    Bad joke? Not really. I have a fantastic comic about the washing machine, but it can only go in the Orange Room , I keep thinking of that comic whenever the WM is mentioned

    Oh and the WM in the photo will be going somewhere when HWMNBO decides to move it out the front and onto the ute.

    cheers
    Wendy

  6. #21
    Join Date
    Feb 2006
    Location
    Lindfield N.S.W.
    Age
    63
    Posts
    1,644

    Default

    We had a washing machine once that when it got out of balance used to jump up and down and raise a huge noise and start wandering out of its space by the laundry, sometimes far enough to pull the hoses off the taps!. It was a big old heavy beast (Hoover, ISTR).

    I remember on one occasion it walked across the laundry and jammed the door and locked my Mum in there for three hours - I had to crawl through the laundry window (I was smaller than she was and could fit through but she couldn't) when I got home from school to help her lift the WM out of the way and free her from her imprisonment!!!

    Which makes me think - if your WM had the same tendancies, and was of similar mass, you could replace the feet with cold chisels and do the washing for the neighbourhood and break up the slab at the same time...

    How's that for lateral thinking.....
    Cheers

    Jeremy
    If it were done when 'tis done, then 'twere well it were done quickly

  7. #22
    Join Date
    May 2004
    Location
    Canberra, ACT
    Posts
    7

    Default

    The quicker you get through that slab... the quicker you get to MIXING CEMENT...the one thing that I hate more than dropping a hammer on my foot...though you might have thought ahead and getting a small truck to bring it in!!
    I think, therefore I am... unable to get anything finished!

  8. #23
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Quote Originally Posted by Moo73 View Post
    The quicker you get through that slab... the quicker you get to MIXING CEMENT...the one thing that I hate more than dropping a hammer on my foot...though you might have thought ahead and getting a small truck to bring it in!!
    What, the hammer?

    Al

  9. #24
    Join Date
    May 2005
    Location
    Eden Hills, South Australia
    Age
    63
    Posts
    87

    Default

    This is exciting Ruffly. Looking forward to seeing progress
    Those are my principles, and if you don't like them . . . well, I have others.

  10. #25
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    3,491

    Default

    Me too, as there is not much I can do now, except wait, pay the $$, and watch the work being done

  11. #26
    Join Date
    Dec 2004
    Location
    Moonta Bay in the Copper Triangle, S. Australia
    Posts
    0

    Default

    Your posing of course!

    Open toed shoes, no goggles, no gloves, and no helmet. Serious concrete smashing needs serious safety wear, and I have the scars to prove it. Wearing sandals and walking backwards with a load cost me a few stitches two weeks back, right on the ankle bone. Concrete has sharp edges.

    Our WM that wandered off back in 1964 was an old (at the time) BENDIX. It pulled right out of the cement floor. We laid a new slab just to take the WM, and few weeks later, it followed SWMBO out of the laundry into the yard.

    Don't forget a window for the air-con, you'll need one of them to stay even longer.
    Buzza.

    "All those who believe in psycho kinesis . . . raise my hand".

  12. #27
    Join Date
    May 2005
    Location
    Newcastle
    Age
    73
    Posts
    1,064

    Default

    Quote Originally Posted by rufflyrustic View Post
    Me too, as there is not much I can do now, except wait, pay the $$, and watch the work being done
    Just keep thinking New Shed New Shed and then when its done plan it out well, take a week or two drawings etc and get it close to right rather than say in a couple of months " I wish I had put that there so I could mill that length etc"

    BTW why not post wour washing machine joke in the orange room or are you sitting on it for another day when nothings going on , come on you have teased us with it post it now.

    Rgds
    Russell

    Ps Every day I use it I thank you for the can opener. As you said its the best on the market, never a problem , Thanks again.
    Ashore




    The trouble with life is there's no background music.

  13. #28
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    3,491

    Default

    Congratulations Buzza! Yes, I was posing for that shot There's no way in &*^%$% I would ever try to bust up that concrete. That makes it four things I just don't do - Electrics, plumbing, mow the lawn and bust up concrete

    The cartoon - well, we shall see.....

    I've been running the NewShed mantra in my head for about 2 years now. I'm pleased to say it's finally worked, well, it only worked when I yelled it so loud HWMNBO couldn't help but pay attention

    Ashore - so glad to hear the can opener is a great help!

    The shed has two windows in it, a personal door and a big 2.7 m roller door. I'm considering taking out the roller door and putting in a wall of windows to get the north sunlight in and a bigger than standard door.

    Planning is definitely needed to work it all out - but that's the fun part

    cheers
    Wendy

  14. #29
    Join Date
    Dec 2005
    Location
    Emerald, QLD
    Posts
    0

    Default

    Good to see it's all finally happening for ya! Remember to lay down the law now - absolutely no room for car-parts of any kind - no exceptions! ..........and just how much camphor can we store in it????
    .
    Updated 8th of February 2024

  15. #30
    Join Date
    Feb 2007
    Location
    Malanda FNQ
    Age
    79
    Posts
    12

    Default

    Quote Originally Posted by rufflyrustic View Post
    I'm so glad I don't have to follow through with Ozito!! I'm wondering if I'll be able to get away with sitting back with a long tall drink and watching the guys get rid of the slab this coming weekend
    Why get the guys to get rid of the slab? Just put hungry boards on your formwork and pour over the top!

    Bruce C









    Of course there will be a few cold ones in the fridge for them, but they don't come out till half time at least

    cheers
    Wendy
    Never play leapfrog with a Unicorn

Similar Threads

  1. Convert Fibro House to Cement Rendered House
    By krm66 in forum CONCRETING
    Replies: 9
    Last Post: 6th January 2007, 02:34 AM
  2. Bear of Small Brain wants to make Mullioned Casement Windows for Very Old House
    By Mutley2003 in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 4
    Last Post: 21st November 2006, 06:40 PM
  3. Do you have working smoke detectors in your house?
    By journeyman Mick in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 46
    Last Post: 16th July 2005, 10:01 PM
  4. Replies: 10
    Last Post: 5th July 2005, 05:24 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •