Results 1 to 6 of 6
  1. #1
    Join Date
    Aug 2004
    Location
    Melbourne
    Age
    53
    Posts
    121

    Default Relocate split system

    Seems I have scored a near to new 3hp split system in perfect running condition.

    2 problems..

    1. It is already installed, operational etc
    2. It is not already installed at my house!

    Has anyone had experience of removing and recommissioning these units before. What have you done with the refrigerant gas etc?

  2. #2
    Join Date
    Aug 2006
    Location
    Australia
    Posts
    66

    Default

    Quote Originally Posted by jimc View Post
    Seems I have scored a near to new 3hp split system in perfect running condition.

    2 problems..

    1. It is already installed, operational etc
    2. It is not already installed at my house!

    Has anyone had experience of removing and recommissioning these units before. What have you done with the refrigerant gas etc?
    To relocate you can "pump down" the refrigerant. This process removes the refrigerant from the pipes and indoor unit, storing it in the compressor. Venting the gas to the air is a big no-no and could get you into a fair amount of trouble if caught.
    I accept no liability or responsibility for advice offered by myself regarding Electrical or Airconditioning related questions. I strongly advise contacting a Licensed Tradeperson for all work of this nature.

  3. #3
    Join Date
    Jan 2007
    Location
    Adelaide - West
    Age
    43
    Posts
    311

    Default

    Hard for you to de-gas / gas the unit.

    Get a fridgy to de-gas it, you remove it,
    Install it,
    Fridgy re-gases it,

    Wont cost much really.
    If you dont play it, it's not an instrument!

  4. #4
    Join Date
    Aug 2004
    Location
    Melbourne
    Age
    53
    Posts
    121

    Default

    Thanks for the tips....

    OK how do you PUMP DOWN the gas? Is it possible to do this with no access to refridgeration tools?

  5. #5
    Join Date
    Sep 2006
    Location
    Melbourne Australia
    Posts
    0

    Default 3Hp Ac

    Hi JimC

    If your not a spark I'd check for implications for your house ins before wiring it in.

    I don't know that for sure - but I do know for sure that I'd check if it were me.

    Good luck any way

    Keith S

  6. #6
    Join Date
    Oct 2005
    Location
    Brisbane
    Posts
    10

    Default

    I had two 1.5HP inverter splits removed by the Daikin dealer who originally installed them, prior to my house being demolished.

    Cost me $200- for the removal for both, although he reckons I must of caught him on a good day when I asked him how much!!

    I havent done anything about a reinstall as yet though.....

Similar Threads

  1. Small Split System Air Con - Advice Please
    By tcns in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 18
    Last Post: 11th January 2008, 12:46 AM
  2. 3 phase split system
    By tcns in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 3
    Last Post: 21st December 2006, 12:03 AM
  3. Reducing cost of split system Air Con install
    By Wildman in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 25
    Last Post: 10th October 2006, 08:02 PM
  4. installing new split aircon system DIY
    By jolybean in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 4
    Last Post: 21st January 2006, 08:51 PM
  5. Split System - Ideal wiring setup ?
    By tcns in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 5
    Last Post: 5th December 2004, 12:07 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •