Results 1 to 4 of 4
Thread: Grohe taps vs Methven
-
6th February 2007, 10:31 PM #1New Member
- Join Date
- Nov 2006
- Location
- Sydney
- Posts
- 3
Grohe taps vs Methven
We were going to buy grohe taps for our bathroom renovation but a salesman at the plumbing supply store told us that methven taps were cheaper and better with a longer warranty. Does anyone have any experience with methven taps or can you recommend any others. Thanks.
-
15th February 2007, 07:40 PM #2
I haven't heard of them but have used Grohe and while it worked it was great (hand held shower thingie) - when it failed, it was simply bloody dangerous, as the lovely stainless housing delaminated and was razor sharp. I doubt they would be made like this these days though ........... I'd would forget brand and go with what you like...... so long as you get a decent warranty and the firm you're buying from is well known and solid.
BTW personally, I have been buying ll my taps from the US and UK - dont care about approvals..... they're for me - and stunning, every one!Steve
Kilmore (Melbourne-ish)
Australia
....catchy phrase here
-
15th February 2007, 08:53 PM #3
Methven is made here (NZ) and is reputable. No issues with quality or design that I have heard of.
-
16th February 2007, 05:44 PM #4Senior Member
- Join Date
- Dec 2006
- Location
- Outer East - Melbourne
- Posts
- 265
I have only ever bought Australian made taps and found them very good quality but not cheap.
Similar Threads
-
converting 1/4 turn taps
By chrisb691 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 4Last Post: 13th June 2006, 10:15 PM -
changing tap washers on hot water taps
By jackiew in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 85Last Post: 6th May 2004, 06:43 PM
Bookmarks