Results 1 to 4 of 4
  1. #1
    Join Date
    Nov 2006
    Location
    Au
    Posts
    1

    Default Outdoor weather proof varnish

    hello,

    I wish to sand back the timber bird feeder i made and re-coat it with a clear varbish that is durable to weather (rain and sun) and outdoor conditions. What product do you suggest?

    My last coat of normal varnish is peeling off after a couples years.

    thanks

  2. #2
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Any varnish, even the most expensive marine grade spar varnish full of nano-sized zinc oxide particles as UV protection, will do that over time.

    I suggest you sand it off and either leave it bare (it is a durable timber, isn't it?) or roughly brush on something like boiled linseed oil or decking oil as a general finish. Just slop some more on every year - or even twice a year - and that should keep it reasonably healthy.

    OR - if it really must be varnished:

    Dissasemble and sand back to bare timber, coat with West Epoxy (ATL Composites in Qld are the Australian distributors but you won't find it at hardware stores - boat shops and speciality woodworker places stock it) paying plenty of attention to the end grain, scuff sand the epoxy and coat with a few coats of marine spar varnish. Repeat the scuff sand and varnish step every 3-5 years before the varnish film breaks down down and starts exposing timber to the elements.

    Here's a how-to link.

  3. #3
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    75
    Posts
    9,670

    Default

    Years ago I had a friend who used an exterior finish made by Sickens. It was UV stabalised and to my knowledge after some 15 years it still hasn't pealed or cracked. It has been recoated a couplew of times and each time the timber comes up looking like it was just out of the saw mill.
    KEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
    Use the Report icon at the bottom of all Posts, PM's and Blog entries.


  4. #4
    Join Date
    Aug 2006
    Location
    Sydney
    Age
    65
    Posts
    1,248

    Default

    when I built my office I used Sikkens Cetol HLS as a base coat and covered it with Sikkens Super Natural on my cedar windows. That was 7 years ago and the windows on the North face have darkened and the surface is just starting to flake, very,very minor. On the South side they look the same as the interior just a bit darker than new but thats probably the cedar doing what it does.
    Compared to the regular oil that my outdoor furniture requires this stuffs a dream.

Similar Threads

  1. Spar Varnish?
    By Shedhand in forum FINISHING
    Replies: 6
    Last Post: 28th January 2006, 10:12 PM
  2. Help removing varnish.
    By TJH in forum FINISHING
    Replies: 9
    Last Post: 25th January 2006, 09:56 AM
  3. Help with removing varnish
    By TJH in forum FINISHING
    Replies: 0
    Last Post: 23rd January 2006, 10:55 AM
  4. varnish problem
    By leon spinks in forum FINISHING
    Replies: 2
    Last Post: 10th December 2004, 10:51 AM
  5. Varnish problems
    By massmtnbikn in forum FINISHING
    Replies: 6
    Last Post: 10th December 2004, 02:43 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •