



Results 31 to 39 of 39
Thread: Home made water tank.
-
3rd February 2007, 04:45 PM #31
The one advantage of using poly tanks (not taking into consideration getting the tank in there) is that you could just buy one for now and then add more later as the funds allow.
Have a nice day - Cheers
-
3rd February 2007, 05:08 PM #32
-
3rd February 2007, 05:11 PM #33
-
3rd February 2007, 05:15 PM #34
Al,
around here it's 1.5M to the side and back boundaries and 6M to your road frontage boundary. If you want to go closer than the 1.5 M you can of it's an open structure (car port or pergola) but if enclosed it needs to be fire rated.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
4th February 2007, 05:41 AM #35
It's 900 here, and increases to 1500 if you're going three stories.
-
4th February 2007, 09:44 AM #36
If its a water tank go right to the boundary.
But if ya gunna make beer in the tank keep it well away
-
4th February 2007, 10:14 AM #37
3000 litre beer vat, carbonated by flatulent goats, MMMMMMMM Beer
Boring signature time again!
-
4th February 2007, 05:32 PM #38
Ok Ive just done a recalculation as I was thinking about it all of today and it was bugging me.
For some reason I calculated 1440 blocks
The real count is 250 blocks.
So that puts the total cost at a reasonable $1300.
Al
-
4th February 2007, 05:57 PM #39
I just thought I’d double check you this time since you’re a brickie.
If it’s 1.6 X 3.6 X 1.8 then: -
(3.6 X 2 + [1.6 - 0.4] X 0.2) / 0.4 = 24
24 X (1.8/0.2) = 216 blocks, but considering that you’re laying them yourself, you’ll need the extra 34 blocks for breakages, so you’ve got it right this time.
Similar Threads
-
Home Made Dyes
By peter in forum FINISHINGReplies: 1Last Post: 9th October 2002, 08:24 PM
Bookmarks