Results 16 to 17 of 17
-
1st February 2007, 02:12 PM #16Novice
- Join Date
- Feb 2006
- Location
- Jan Juc
- Posts
- 17
Hi SilentC/All,
I just thought of one other question that has occurred to me as I was reading other folks posts regarding low decks (or as I may want to call it if council drop by "walkway"). Is it possible/feasible to forgo posts/stumps all together and just bolt my bearers straight into/onto a one sided stirrup? Up until this week I was all set to buy 100x100 H5 Tp stumps, whack them in and cut them off where necessary with the intention of notching in the bearers but as I sit here I wonder why I can't just bolt the bearers straight on to the stirrup? Provided they were all in the right spot and at the correct level then they should just slot in and I don't have to worry about moisture on timber etc.
Whadayareckon?
Cheers
Mick
-
1st February 2007, 02:21 PM #17
I've never built anything that close to the ground but I don't think there's anything that says you have to have stumps. In fact the stirrup would be the stump in that case. I've got a feeling I've seen it done somewhere.
I think if you're going to go down that path, then follow Pharma's advice and leave a gap between your walkway and the house so that you reduce the likelihood of termites bridging and you should be right. It then just becomes a landscaping structure. In fact you've almost convinced me to do a similar thing at our place where I have a similar problem.
Similar Threads
-
decking advice
By fuel-depot in forum DECKINGReplies: 10Last Post: 15th November 2006, 11:51 AM -
bearers and joist for deck.
By mickfromperth in forum DECKINGReplies: 16Last Post: 20th August 2006, 07:46 PM -
Feedback on decking project
By nmilne in forum FLOORING, DECKING, STUMPS, etc.Replies: 6Last Post: 9th January 2006, 10:44 AM -
deck bearer and joists
By gilbo in forum DECKINGReplies: 6Last Post: 6th December 2005, 02:56 PM -
decking design
By Trav in forum DECKINGReplies: 3Last Post: 10th December 2003, 07:36 PM
Bookmarks