Results 1 to 10 of 10
  1. #1
    Join Date
    May 2006
    Location
    Melbourne
    Age
    54
    Posts
    150

    Default Concrete slab for shed

    Can anyone give me a rough idea of a price for a concrete slab for a tin garden shed?

    It's an Absco 3000 x 2180, nothing fancy, just somewhere to store stuff. Their web site says the slab needs to be 3100 x 2280 with a 70mm rebate around the edge. Not sure how thick though.

    I'm going to ring a few places on Monday, but if anyone can give me a ball park figure, it'd be much appreciated.
    Cheers,
    Anthony

  2. #2
    Join Date
    Oct 2003
    Location
    Kentucky NSW near Tamworth, Australia
    Age
    86
    Posts
    1,067

    Default

    Don't know about Melbourne but around here they are charging around $100 m2 supplied and laid on level ground.

  3. #3
    Join Date
    May 2006
    Location
    Melbourne
    Age
    54
    Posts
    150

    Default

    Hmm, $100m² comes to about $100 more than the cost of the shed. Perhaps I'll have a crack at it myself...
    Cheers,
    Anthony

  4. #4
    Join Date
    Jun 2006
    Location
    East Warburton, Vic
    Age
    54
    Posts
    3,542

    Default

    I had mine done for about $65-$70m2 at 100mm thick
    Cheers

    DJ


    ADMIN

  5. #5
    Join Date
    Nov 2004
    Location
    tasmania
    Age
    60
    Posts
    154

    Default

    I work it out at half a cubic meter of concrete if you make it 80mm thick which is ample for a garden shed . You might want to make the edges thicker , say 200mm deep for the width of a shovel all around . About 5 bags of cement (6 to cover yourself ) and a 1/2 cubic meter of concreting gravel ( might as well get a whole meter ) cost you a a bit over hundred bucks . Mix it in a wheelbarrow , its only a small job . Screw/nail timber along your formwork to provide the rebate . Tap the formwork lightly to settle the concrete.
    My 2 cents worth .
    Rick
    uhm , where am I ?

  6. #6
    Join Date
    Oct 2004
    Location
    Melbourne
    Posts
    0

    Default

    I've recently done the slab for my shed with my father in law just over 5mx3m, the hardest work is levelling the ground to start off with.

    Personally I would not waste my timing mixing it up, I'd get a concrete truck. You need formwork, some mesh and chairs and crushed rock. Ideally have a 2inch layer of crashed rock down first and compact this well (you can hire a compactor for around $50). Then lay plastic over that and sit the mesh on chairs on the plastic. When you pour the concrete you will need some sort of tool to use to screed (get a mate to help out with this). 2 hours later smooth it all out. If you are ordering concrete even for a small shed like this I would make the slab 100mm thick, it will not cost much more and the chance of cracking is minimal.

    It is easy work once the ground is level but ideally you need 2 people when pouring the concrete.

    regards

    Marios
    You can never have enough planes, that is why Mr Stanley invented the 1/2s

  7. #7
    Join Date
    Dec 2004
    Location
    Moonta Bay in the Copper Triangle, S. Australia
    Posts
    0

    Default

    Rick, just what I needed to know. Now I can get my three year old Virgin Cement Mixer from under its tarp, and have a go. (When it comes in a bit cooler).

    Is water still allowed to be used to mix cement?
    Buzza.

    "All those who believe in psycho kinesis . . . raise my hand".

  8. #8
    Join Date
    Nov 2006
    Location
    northwest victoria
    Posts
    3

    Default

    Quote Originally Posted by atregent View Post
    Can anyone give me a rough idea of a price for a concrete slab for a tin garden shed?

    It's an Absco 3000 x 2180, nothing fancy, just somewhere to store stuff. Their web site says the slab needs to be 3100 x 2280 with a 70mm rebate around the edge. Not sure how thick though.

    I'm going to ring a few places on Monday, but if anyone can give me a ball park figure, it'd be much appreciated.


    i just paid $3000 for the slab to my new shed...

    its 12m x 7m, and 2700 high to the gutter line...

    included was plastic, red loam, formwork, mesh and chairs, and labour, including the clean up, and 200mm x 200mm trench around the perimeter...

    the plastic wasnt mandatory, and i also got them to dig a 300mm pad wherever a post had to be chem bolted....

    the concrete was approx $1600 in that price...

  9. #9
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    3,491

    Default

    $1500 for a 6 x 4 m slab for me

    cheers
    Wendy

  10. #10
    Join Date
    May 2006
    Location
    Melbourne
    Age
    54
    Posts
    150

    Default

    Ended up doing the job myself on the weekend. $200 for the concrete, $30 for the timber formwork, and $21.95 for a new pair of gumboots.

    Oh, and $13 for an edger thingy.
    Cheers,
    Anthony

Similar Threads

  1. Concrete Slab Insulation
    By dallas in forum CONCRETING
    Replies: 10
    Last Post: 11th June 2007, 07:05 PM
  2. Concrete Slab Curing Question
    By Moe Z in forum CONCRETING
    Replies: 10
    Last Post: 1st November 2006, 05:04 PM
  3. Grinding a concrete slab
    By vGolfer in forum CONCRETING
    Replies: 19
    Last Post: 25th August 2005, 11:08 PM
  4. Extending a concrete slab
    By princhester in forum CONCRETING
    Replies: 8
    Last Post: 24th July 2005, 08:49 PM
  5. Curing Concrete Slab
    By Metung in forum CONCRETING
    Replies: 6
    Last Post: 27th May 2005, 11:27 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •