Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
14th December 2006, 10:45 AM #1
Electric hot water system making cold water
Greetings,
I have an electric hot water system - the type with a big tank sitting up in the roof.
Suddenly, it's not making hot water. I've checked the appropriate switches on the mains board and they're both "On".
I've been up in the roof, and it is refilling itself properly - it's just not heating up the water. I'd heard these systems kind of go on forever, so I'm wondering if there's something else I can check.
I've called the plumber - waiting for a call back - but would love to avoid the fees if I can sort it out myself.
But, it seems to me like it's just the electrics stuffed up. In which case, I won't be fixing anything.
Any thoughts?
Thanks.
PS - probably a coincidence, but a couple of days ago, we had brown water coming out of all our taps - hot and cold. It took several buckets full of brown water until it eventually cleared up. That followed a day of 42 degree heat!
-
14th December 2006, 10:49 AM #2
Sounds like your heating element has shat itself
Cheers
DJ
ADMIN
-
14th December 2006, 10:50 AM #3
Sounds like your heating element has given up the ghost. This is easily replaced as it sits in it's own space within the tank and can be easily removed.
The brown water could indicate that the tube around the element has rusted through and this normally means a new HWS:eek:
-
14th December 2006, 11:03 AM #4
Thanks mate. Hopefully that's it. That'd be a job for the plumber, of course?
-
14th December 2006, 11:04 AM #5
I hope not! Hopefully the fact that the cold water was brown too means it wasn't the heater doing it. Thanks for that.
-
14th December 2006, 01:07 PM #6
I was under the impression that the element was a job for the electrician, and if the tank is stuffed a plumber as well.
-
14th December 2006, 07:24 PM #7
Its funny how people always call a plumber when there is a problem with their hot water system. If there is water going in and coming out then its not a plumbing problem. Call your electrician.
-
14th December 2006, 08:36 PM #8
You will need a sparky because some elements require a specalist spanner to undo them and where the wires connect to the element is a job for a sparky so if you don't know what you are doing be safe and call the sparky.
Similar Threads
-
Solar hot water
By ozwinner in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 12Last Post: 19th March 2008, 08:47 AM -
hot water system
By Gaynor in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 19Last Post: 1st August 2004, 06:47 PM -
changing tap washers on hot water taps
By jackiew in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 85Last Post: 6th May 2004, 06:43 PM -
How well does cold water clean?
By Christopha in forum JOKESReplies: 0Last Post: 18th April 2004, 07:54 PM -
Hot water system questions
By Arron in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 6Last Post: 22nd December 2003, 11:00 PM
Bookmarks