![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: Finally a good use for books...
-
6th December 2006, 07:23 PM #1
Finally a good use for books...
Finally found out what books are for the other day, thought i'd better share...:
-
6th December 2006, 07:29 PM #2
Good idea, but would be interested to see how you glass is looking now.
Sparks and glass don't mix.Cheers
DJ
ADMIN
-
6th December 2006, 10:13 PM #3
Glass is fine, melting point of glass is about 1200 degrees C, bit higher than the sparks!
-
6th December 2006, 10:27 PM #4
Melting point might be high, but in one of my old jobs as an on site welder, the stories you hear about the welders who use grinders and cut off saws near glass was neverending.
I have seen brand new windows in new houses having to be replaced cause of grinding or cutting near windows.Cheers
DJ
ADMIN
-
6th December 2006, 10:54 PM #5
if that glass is to be used for something, I would suggest you move it before doing any cutting or grinding.
Melting point of mild steel is 1515 ° C, so when those grinding sparks hit the glass, they will dissolve and you will have a nicely pitted effect, if thats what you're after. DAMHIKT...
I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein
-
6th December 2006, 11:56 PM #6
Similar Threads
-
Good Australian computer forum?
By Shannon in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 8Last Post: 23rd January 2006, 12:56 PM