Results 1 to 15 of 19
Thread: The deck we built
-
29th November 2006, 03:20 AM #1
The deck we built
Still standing and rock solid after three months so I guess it's safe to post the pics now. Pretty pleased with the results thank you very much!
-
29th November 2006, 09:02 AM #2
Looks nice, mate
The beatings will continue until morale improves.
-
29th November 2006, 09:06 AM #3
Very nice.
What decking timber and oil did you use?Cheers.
Vernon.
__________________________________________________
Bite off more than you can chew and then chew like crazy.
-
29th November 2006, 09:07 AM #4
-
29th November 2006, 09:16 AM #5
-
29th November 2006, 09:22 AM #6
-
29th November 2006, 09:42 AM #7
Good job toddles. First rate, mate. Nice finish.
Cheers,
Bob
-
29th November 2006, 10:58 AM #8
Very sleek. Where's the barbie?
The only way to get rid of a [Domino] temptation is to yield to it. Oscar Wilde
.....so go4it people!
-
29th November 2006, 12:56 PM #9Novice
- Join Date
- Oct 2006
- Location
- Lara
- Posts
- 11
the finish looks perfect! how did you achieve that?
-
6th December 2006, 10:14 PM #10Novice
- Join Date
- Oct 2006
- Location
- oZ
- Posts
- 14
termite treatment??
Hey toddles,
How's going. Your deck looks awesome. I'm thinking of undertaking a similar project, except mine is a brick veneer house, but i guess the house is wood anyway.
The similarity is that mine will be close to ground also (0 clearance).
How did you build it? Did you lay a concrete base, and used treated kiln dried hardwood on HD joists side nailed to battens which bolt onto slab? (what a mouthful)
And did you have any termite protection at the external walls of the house where the deck meets the house?DFA
-
2nd January 2007, 01:21 AM #11
-
2nd January 2007, 01:40 AM #12
cheers.
The joists are treated pine at 45mm intervals. The ledger is a length of the same bolted onto the the house wall with big ramset wall bolts and a couple of stainless steel washers between the timber and the wall to avoid rot. The joists are hung with galvanised joist hangers. The bulk of the area under the deck was paved (see photos) but sloped so we cut lengths of treated pine into short legs to support the deck with galvanised coach bolts screwed in as feet to provide clearance off the paving - a very effective, adaptable and cheap option. EVERTHING is screwed rather than nailed to avoid nail popping in the dry summer, wet winter Perth climate and we used decent quality non-corrosive decking screws - that took forever but it's worth it. Decking timber is Batu with Cabot's Natural Decking Oil brushed on in two coats. House is double brick so no need for termite protection beyond the treated frame (we hope).
-
2nd January 2007, 10:53 AM #13Quantum Field Theorist :-)
- Join Date
- Mar 2006
- Location
- Sydney, NSW
- Posts
- 0
How much of the deck gets full exposure to sun & rain? It's not clear from
your pics - looks like part of the deck is sheltered under the eaves?
The reason I ask is that retaining a good appearance after only 3 months
is easy - but I wonder what it will look like after (say) 12 months with only
the 2 coats of decking oil. My neighbours did a deck in blackbutt, with
2 coats of Cabots natural, but it quickly became very grey and old-looking
within 6-9 months. They've now applied a darker oil to camouflage it.
I'd be interested to hear later how yours performs over time.
Cheers.
-
19th January 2007, 01:58 AM #14
Strangerep - it's half fully sheltered, half totally open. As per the instructions on the can my MIL (deck at her house) has applied the 3 monthly recoating and the deck still looks A1. Regularly reoiling as necessary is an important part of deck maintenece if you're going to avoid you're neighbours problems I guess.
-
30th January 2007, 03:59 PM #15Novice
- Join Date
- Jan 2007
- Location
- Townsville
- Posts
- 1
Diagram
Hi Toddles, great looking deck.
I am looking at building an almost identical deck low to the ground. Max 260mm on the right, sloping up to 150mm on the left hand side.
The Deck will be 3.8m x 5.8m in size.
As I have never built a deck before, would you be able to provide an illustration or photos of the deck in the construction phase. I am having difficulty visualising the steps as there are many methods to use.
Regards
Pat
Similar Threads
-
(Another) Low clearance deck in perth. [Long...]
By mickfromperth in forum DECKINGReplies: 2Last Post: 15th November 2006, 07:50 PM -
question about deck flooring
By biotechy2k in forum FLOORINGReplies: 7Last Post: 17th October 2005, 08:47 AM -
Deck refinishing
By jimj in forum FINISHINGReplies: 2Last Post: 20th April 2005, 07:33 AM
Bookmarks