Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 35 of 35
Thread: Backing for Glass Splashback
-
14th November 2006, 10:54 AM #31
It's a bit like woodwork. The better the preparation, the better the finish.
Our wall was plastered, so the glass fitted absolutely flat on the wall and only required a very thin bead of clear sylicon to seal the edges.
I can't imagine the finish you would get around the edges with any kind of build out from the wall.
-
14th November 2006, 12:57 PM #32
All the splashback people who wuoted our job stated the background wall colour does not matter a toss because the painted finish on the glass is a solid colour...even white.
The crowd I went through, who I can highly recommend are Imperite Perfections in Bayswater...phone 97620331. They were well priced and had a huge selection of colours including metalic automotive finishes.
We had over 6.5 square metres of glass installed with a metallic finish installed for $2700(5 panels). That included 6 power point cutouts!
-
14th November 2007, 09:15 PM #33
cheaper glass splashback??
Hi
Just wondering if anyone has tried painting the wall in a water proof/mould shield coloured paint and then putting clear heat proof glass over the top?? would it work?? would it be cheaper??
Cheers
Bloom
-
15th November 2007, 12:31 AM #34
vgolfer, I have a very light blue glass splashback and my wall looked 10x worse than yours. I had a line cut into the wall for the gas cemented over and exposed brickwork and plaster. I simply painted the wall white as instruceted by the glass guy and the stuck it on with silicon. He didn't care about the irregular surface as long as it was white.
No shadows, even colour throughout, no problems
-
20th November 2007, 01:21 AM #35
Don,t worry about iregular walls to much,as long as you can get a vertical strip of silicone about 600mm apart(use strips of 3or 6mm mdf to build out if needed) When it can be suported by bench top, this is plenty.Iallways request walls be sealed and it is better to be of a similar colour/shade. Do not have anything other than vertical beads of nuetral silicone.There is no absolute correct way of fitting splashbacks,it just depends on which way the tradie/company finds what works best for them
maca
Similar Threads
-
Splashback tiling - upside-down glue?
By makka619 in forum KITCHENS, BATHROOMS, THEATRES, etcReplies: 2Last Post: 2nd November 2006, 04:21 PM -
Tiled splashback
By mrsxtro in forum TILINGReplies: 16Last Post: 5th December 2004, 10:51 PM -
cheaper splashback glass?
By Mybrains in forum KITCHENSReplies: 21Last Post: 1st November 2004, 11:49 AM -
Cost of Tiling Kitchen Splashback
By Sir Stinkalot in forum KITCHENSReplies: 11Last Post: 18th April 2003, 10:28 PM
Bookmarks