Results 1 to 3 of 3
-
1st October 2006, 09:29 PM #1
oil or estapol for internal steps?
Hi all, i have sanded back the internal steps in my townhouse and wondering if oil or estapol is the best to use. It will be a rental so i'm after something low maintenance and not too slippery. The steps are hardwood but not sure what though it looks a bit like kwila.
I'm also using 70mm kwila decking for the balustrade as well as a kwila lady waist banister which i also want to oil / estapol.
Any suggestions as to what is the best product to use?
Thanks
-
1st October 2006, 10:26 PM #2SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- kiama
- Posts
- 390
Personally I would carpet the stairs in a rental property.
Tenants stuff things up so much they would give the timber a rough time.
Having said that, 2 pack polyurethane would wear best, oil would be pretty much useless, if you are worried it may be slippery you could add non slip strips or put abrasive in the coating to make it non slip.
There are also commercial non slip products for floors which also work.
-
2nd October 2006, 11:35 AM #3TIMBER FLOOR CONTRACTOR
- Join Date
- May 2006
- Location
- sydney
- Age
- 65
- Posts
- 346
Durwood is correct. 2pac or satin single pac solvent based polyurethane would be better suited. Dont worry it wont get slippery. You will get years of good wear with these products. Oil on deck, recoat every 2 years
Similar Threads
-
gel estapol over oil not drying?
By TimberNut in forum FINISHINGReplies: 4Last Post: 26th July 2006, 09:39 AM -
Oil Change
By bennylaird in forum JOKESReplies: 14Last Post: 1st February 2006, 09:11 AM -
can you estapol over tung oil
By ginnymac in forum FINISHINGReplies: 4Last Post: 10th May 2005, 11:44 PM -
Oil change
By Iain in forum JOKESReplies: 1Last Post: 1st November 2001, 06:56 PM -
Finishes over estapol tung oil
By fcm in forum FINISHINGReplies: 1Last Post: 1st June 2001, 02:53 PM
Bookmarks