Results 16 to 26 of 26
Thread: Triton Respirator questions
-
8th September 2006, 07:32 PM #16
The last time somebody here posted what they had left in the way of triton gear, it was mainly hundreds of cheap saw blades. Like thetrpile cuts which sell in Bunnings for $100 were about $25. Other than that, I think most of the stuff is gone.
Do a search here for Hills Clearance centre and you'll find the relevant threads.If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
8th September 2006, 07:37 PM #17
Hi Gumby,
yes I did mean the other Dandenong - Keysborough.
Hills Clearance Centre,
Tubing & Factory Seconds
Keysborough Cambria Rd (cnr Bridge Rd) 3173
(03) 9238 2555
Thanks for the correction.Cheers,
Steck
-
8th September 2006, 08:30 PM #18
back to the original question, i grow a beard from time to time and i have no problem with the triton respirator with the beard or without the beard, makes no difference. as for using it with glasses, i find i have to open the visor or the beer goes all down my front.
BenchdogDont waste your breath trying to explain the rules of chess to a pawn
-
8th September 2006, 09:16 PM #19
Thanks benchdog. The beard thing was a concern. I would hate to buy the respirator only to find that I had to shave it off. I haven't shaved in 17 years (see avatar for before shot) and I don't plan to start now...
-
9th September 2006, 09:08 AM #20SENIOR MEMBER
- Join Date
- Nov 2005
- Location
- adelaide
- Posts
- 0
respirators in adelaide
was at our hills clearance centre the other day they still had refurbished respirators for a $100 might be still worth the extra postage for yuo (ph 08 829356110)
-
10th September 2006, 03:19 PM #21
Got mine from hills clearance in sydney for $130.
Should also add it doesnt work!! the unit wont charge. bought it in may and just been using it as a glorified faceshield.
do i call the clearance centre or get it checked out or GMC??
robert
-
10th September 2006, 07:56 PM #22SENIOR MEMBER
- Join Date
- Nov 2005
- Location
- adelaide
- Posts
- 0
hills clearance
if yuo still have the reciept id go for hills first they told me mine had a warranty but i cant remebr how long it was for
-
10th September 2006, 08:14 PM #23
-
11th September 2006, 12:03 PM #24
They have an odd name:
Southern Rocycling
252 Georgetown Road
Rocherlea
Phone: 03 63263177
Mobile no: 0438 732 069
www.southern-ro.com.au
-
13th September 2006, 08:39 PM #25
Thanks for the advice everyone. I picked one up at the local Bunnings yesterday for $197.
Also bought a nice new Domino from Anthony.
-
24th September 2006, 08:19 PM #26
G'day Dylan
Have had the Triton unit since they first hit the market (didn't have the funds for the 3M unit). I put up with the early feeder hose for a long time, but then got onto Triton, which had then turned to Hills, which has now turned to GMC. Two new owners later (GMC, that is) then supplied me with the upgrade hose, helmet insert and battery pack top "FREE OF CHARGE". Hard to believe I know.
But all is good, my battery pack is now showing signs of not holding charge and I get about 4 -5 hours.
I have a full beard and have not had any problems with fitting of the dust skirt. I does a good job. Just remember to change your P2 filters on a regular basis and keep the pre filter clean.
Best investment in saving my lungs.
regards
Keith HHe who dies with the most gadgits - wins!
Bookmarks