Page 2 of 2 FirstFirst 12
Results 16 to 29 of 29
  1. #16
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    I had a spare arvo yesterday.
    And Ive got a spare day today as the bricks are still being cooked..

    So I tryed to start it up, no go.

    Plenty of spark, but no fuel getting through, this thing hasnt been stated for ages from the looks of it.

    Anyway I took off the carbie to see if the pump was ok, yep seems fine to me.

    Next step, I went and got some Start Ya Bastard from the spares shop and will give it a try today with a little squirt.

    The dangley thing in the fuel tank, its just a pick up with a weight isnt it?

    Al

  2. #17
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    Quote Originally Posted by ozwinner View Post
    ....The dangley thing in the fuel tank, its just a pick up with a weight isnt it?

    Al
    Could also be a filter.

    I had a Honda motor with heaps of spark that wouldn't start, turned out to be a crook plug so grad a spare one of them too.
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  3. #18
    Join Date
    Jan 2005
    Location
    Stratford, New Zealand
    Age
    62
    Posts
    53

    Default

    Yup.. there is a fuel filter built into the pickup.

    Other things to check are fuel lines that have perished and cracked, and old fuel left in the carby turned into sticky jelly. Also diaphrams and seals in the carb can perish as well.

    You may end up having to strip down the carb, clean it out and rebuild it, Stihl dealer should be able to sell you a kit with all the gaskets and do-hickys you need.

    Cheers

    Ian

  4. #19
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Ok I had a better look at the model number tag.
    It is on the side and almost worn away from years of laying it over to fill the fuel tank.

    Now I think it says 085 S, or 089 S?

    Anyway, with a squirt of Start Ya Bastard it fires up beatifully, but wont stay running without the squirt, seems an expensive way to keep it going.

    How does the fuel get to the carb?
    Should the fuel tank pressureise to force the fuel into the carb?

    Al :confused:

  5. #20
    Join Date
    Jul 2000
    Location
    Drop Bear Capital of Gippsland (Lang Lang) Vic Australia
    Age
    74
    Posts
    2,238

    Default

    I've seen those little rubber pump things suck air without leaking fuel, the one you pump with your thumb under the carby to get the fuel to it for start up.
    Or the little pick up with a weight is a solid mass as the felt has solidified.
    Stupidity kills. Absolute stupidity kills absolutely.

  6. #21
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Quote Originally Posted by Iain View Post
    I've seen those little rubber pump things suck air without leaking fuel, the one you pump with your thumb under the carby to get the fuel to it for start up.
    Or the little pick up with a weight is a solid mass as the felt has solidified.
    I checked the foam in the pickup, it seemed fine.
    There is no primer pump on this thing, nor have I ever seen one on a Stihl chainsaw, and Ive had a few over the years.

    The other thing I might do is just trade it in on a newer model some time down the track.

    Al

  7. #22
    Join Date
    Jan 2005
    Location
    Stratford, New Zealand
    Age
    62
    Posts
    53

    Default

    Yup, the carb generates a vacumn to suck up the fuel, if a fuel line has perished it may just suck air, so check that. Blocked fuel filter is pretty likely too, probably fit a new one on general principle.

    Otherwise I think you are going to have to perform surgery on the Carby.
    It's probably a standard Tillotson carb and overhaul kits are available online if your local dealer cant supply or wants too many $$ for it

    Got a pic of the saw? Someone will be able to ID it from a photo.
    Stihl models like that are 084 and 088, both are 120cc BEASTS. Other wise it could be an 08S, smaller 56cc saw from the 1960s. Uses a Tillotson carb as well, so is probably fixable too.


    Go easy on the starter spay - there's no lube oil in there But it has proven your problem is carby related, somethings blocked or leaking.

    Cheers

    Ian

  8. #23
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Thumbs up

    Cheera Ian.
    I will get a piccy of it tomorrow.

    I still dont get the carby sucking thing, owwh I know they are supposed to create a vacuum, but how do you get it to suck from a dry start?

    Al

  9. #24
    Join Date
    Jan 2005
    Location
    Stratford, New Zealand
    Age
    62
    Posts
    53

    Default

    Hi Al

    With a big saw, just pulling it over creates enough vacumn to prime the carb, well after a few pulls anyway. It only has to suck the gas 6" into the carby. The little 30-50cc saws dont create much suck, so they usually have a little primer bulb on the side of the carby.

    Well thats the theory anyway, if you have air leaks or gummed up internals, then you get what you have now.

    Cheers

    Ian

  10. #25
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    I have a 1963 Stihl 08S.

    From dead cold after it has been sitting for a while it needs about 4 snorts of 'Hair Spray' (what it smells like) to get it to start & stay started.

    It has no primer pump & the choke won't stay on so the trick is to give it a good blast of Aerostart, grab the throttle back handed with your left hand so you can hold the choke on with your left thumb, put your left foot on it & give it a pull with your right hand, it roars to life for about 5 seconds. Do it all again til it stays alive.
    Picture of it now & some of the work done with it here.
    http://www.woodworkforums.ubeaut.com...0&d=1152444106
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  11. #26
    Join Date
    Aug 2006
    Location
    Greater Axedale (near Lesser Bendigo)
    Age
    75
    Posts
    145

    Default

    Just my thoughts - take the plug out, put your thumb over the plug hole and give it a few pulls - if your thumb is getting a bit wet you have fuel coming through from the tank OK (make sure you are using fresh fuel!).

    If the fuel flow seems OK as above, try making very slight adjustments of the carbie idle tuning screw - maybe a 1/4 turn one way for about 1 1/2 full turns in 1/4 turn increments - if this does not produce a running engine, set the screw back to where it was when you started, and go the other way. I am pretty sure that the spray stuff will keep the saw running long enough for carbie adjustments to kick in.

    If you have not used the saw for a bit but it was running last time you used it, don't assume it will necessarily run again now - doesn't always happen that way sadly!

    T'other thing is that a plug that sparks when out of the donk , may not necessarily spark when it is wet and under compression. Spent a couple of hours on my mower recently with a similar problem - old plug but lovely and clean and gave a strong spark out of the engine, but the engine would not run. Put in a brand new plug and away she went first pull!

    Good luck - hope the hands don't hurt too mcuh from al lthat yanking on the starter handle!

    Jeff
    Life is just a leap of faith
    Spread your arms and hold your breath
    And always trust your cape

  12. #27
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Thumbs up

    Quote Originally Posted by Cliff Rogers View Post
    I have a 1963 Stihl 08S.

    The picture you put up Cliff is a dead ringer for mine, except mine has a chain brake.

    Al

  13. #28
    Join Date
    Jan 2005
    Location
    Stratford, New Zealand
    Age
    62
    Posts
    53

    Default

    Probably an 08SE then, that looks like the deluxe model, 60cc AND a chain brake

    I did a Google search and found they are still for sale new in South America, that suggests they are probably a good model.

    Cheers

    Ian

  14. #29
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Tryed a new plug and no spray, it didnt start.
    I didnt think of the dry engine with the spray until Ianab said about it.:eek:

    Took off the fuel hose from the tank to the carbie and there is a hint of fuel in it where as before there wasnt.

    Looks like a carby rebuild it is.

    I also did a google and found one for sale in South Africa, they wanted close on AU$800. :eek:

    Al

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •