Results 1 to 15 of 38
Thread: Any interest in a Monday thread?
-
18th September 2006, 08:52 AM #1
Any interest in a Monday thread?
Could be depressing though with a whole weeks wait till the friday thread?
Anyhows, I had a good weekend, no footy to worry about and managed to get a mosaic table top well under way, no woodwork though as shed is still a pigsty. Son is moving out so will get it back as soon as all his furniture etc leaves.
Hope Cliffie is still kicking, looking in the paper to see if there is an anouncement of his demise.
Brendan is now right into his 30's but is he still scratching?
Zed has electrons flowing again, but must be working through his banana pile.
While Silent be Silent on a Monday?
Will this thead be shut down in order to keep the Friday thread theme alive and healthy.
Has Wendy had a BBQ this weekend and cut up all the sausages?
So many questions??????
Morning all.
-
18th September 2006, 09:29 AM #2
Why are people so cheery on a monday morning....
I may not have gone where I intended to go, but I think I have ended up where I needed to be.
My Other Toys
-
18th September 2006, 09:32 AM #3
Arrr Benny me lad
howes them pencil cases coming along ?
shiver me timbers
ian
who's a day early
-
18th September 2006, 09:35 AM #4
Restored a Stanley No3 that I got at auction came up nice
All ready for a boring week
PhilTwo things are infinite: the universe and human stupidity; and I´m not so sure about the universe.
-
18th September 2006, 09:37 AM #5
-
18th September 2006, 10:01 AM #6
dont even want to think about the week too much work and not enough time...
-
18th September 2006, 10:07 AM #7.
- Join Date
- Jul 2005
- Location
- Victoria
- Posts
- 0
-
18th September 2006, 10:07 AM #8
Took delivery of a #6 (ex trademe) which seems to be in VGC and makes a nice screaming noise when slicing through whatever scrap was lying around for test purposes. The lever cap adjusting screw is bottomed in it's thread - doesn't lock down real hard. Maybe a different lever cap has been substituted for the original. I'll have to restrain this darkside thing. Got 3,4,5 and 6 plus my grandfather's wooden jack plane (he was a bridgebuilder when bridges were made out of 12 x 12 beams; not sure if he personally planed them from round to square...). Joined up a frame to keep birds out of the tunnelhouse when the door is open to let a bit of the heat out. Up at 3.45am to drive to work down south. 4 hours 20 minutes - not bad at all. Commodore is doing consistent 30+mpg.
-
18th September 2006, 10:08 AM #9
Absolutely knackered. Spent all day Saturday in a studio recording 14 songs, then played a gig at the pub on Saturday night - home at 2am. Got up on Sunday morning, made the wife breakfast, then spent the day digging pier holes in rock hard ground. I'm glad to be back at work for a rest
"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
18th September 2006, 10:16 AM #10.
- Join Date
- Jul 2005
- Location
- Victoria
- Posts
- 0
-
18th September 2006, 10:20 AM #11increadably taxing"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
18th September 2006, 10:24 AM #12
-
18th September 2006, 10:28 AM #13.
- Join Date
- Jul 2005
- Location
- Victoria
- Posts
- 0
-
18th September 2006, 10:29 AM #14
Well, I suppose it took an hour to set up and do the sound check. Then we had to wait for the bass player to turn up. We got most of them in one take - drums only, the others have to go back and re-do some tracks - but you stop and listen to each one to make sure it was OK. Then the lightweights wanted to stop for lunch. I wanted to be in and out before 2 but I didn't end up leaving until 4:30.
It's a long way to the top"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
18th September 2006, 10:34 AM #15
Bring out your dead.....
But I'm not dead yet.
Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
Similar Threads
-
Another Searching Thread
By bitingmidge in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 9Last Post: 31st May 2006, 10:56 AM -
Where the blazes did that Teak thread go?
By Wild Dingo in forum HAVE YOUR SAYReplies: 14Last Post: 11th March 2006, 07:35 AM
Bookmarks