![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Rats have had a chew
-
14th September 2006, 08:57 PM #1
Rats have had a chew
Knocked out a small wall to open up the laundry. It ran under a support beam which has some wiring and pipe work running along it. There were 5 dead rats in the wall and at some stage they had chewed on one of the power lines. Only one wire - the black/neutral was though to the copper over about 1/2 inch. I've bound it up with insulation tape but should this be cut and rejoined in a junction box?
David L
-
14th September 2006, 09:00 PM #2
-
15th September 2006, 12:25 AM #3
-
16th September 2006, 08:06 PM #4
a junction box isn't a good idea, as if the house needs rewiring, when the sparky doing th job goes to pull the cable through he'll have to knock a hole in the wall to get to the juction box, or run it through an all new path
Similar Threads
-
Rats
By gemi_babe in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 20Last Post: 15th September 2004, 09:43 AM
Bookmarks