Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2006
    Location
    syd
    Posts
    59

    Default Sanding back some high spots - Self levelling cement

    Hi there - I poured this the other day but I was short by 1 bag. So it started setting before I got the other bag in.

    When I added the rest it has set higher in one area by abut 3mm. Could I sand the build up slightly to get it relatively level.

    I am going to be putting down floating floors.

    I there any quick way besides concrete grinding? Id on't have to take too much off..it is reasonably ok.

    Thanks

  2. #2
    Join Date
    Jul 2006
    Location
    syd
    Posts
    59

    Default

    Could I use an angle grinder on it to just knock off some of the higher areas?

    Thanks

Similar Threads

  1. Self levelling cement - different brands etc
    By powerbuff in forum CONCRETING
    Replies: 9
    Last Post: 22nd August 2006, 10:07 AM
  2. Sanding back between coats
    By aabb in forum FINISHING
    Replies: 5
    Last Post: 8th August 2005, 09:39 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •