Results 1 to 7 of 7
  1. #1
    Join Date
    Aug 2006
    Location
    Sydney
    Age
    65
    Posts
    1,248

    Default Are those blades tight?

    I recently replace my blades on my el cheapo electric planer with some new system that some salesperson ... cant recall what they are called. anyway the instructions said clearly (No code violation I only glanced at them) DANGER TIGHTEN BLADES BEFORE USE! This i did, I even loosend them of again to check their alignment. Started it up sounds good, place it on the very well seasoned Blackbutt slab and BLAM the whole thing disintergrated in my hand in one nanosecond with the sound of a small bomb exploding. Even the metal baseplate shattered leaving bits of metal all over the shed. It gave me a hell of a shock but for some reason before I went to work I had doned a full face mask, earmuffs, leather welder gloves and my work boots and jeans. I must admit I dont always but after that and after reading some of these other treads I'm more aware of my own safety now.

  2. #2
    Join Date
    Jan 2006
    Location
    Bowral, NSW, Australia
    Age
    74
    Posts
    28

    Default

    You'd end up with more than a bleeding thumb if you hadn't put on that safety gear. Lucky!!!!
    And when are these guys going to realise that there are no workshops or tools upstairs? (And they use the wood in the furnace in the other place)
    Long live this thread, but boy is it sobering to read it each week!

    Carry Pine

  3. #3
    Join Date
    Feb 2005
    Location
    East Bentleigh, Melbourne, Vic
    Age
    68
    Posts
    180

    Default

    Holy Moly!

    That sounds like it could have been rather nasty! You signature line reads "If it's worth doing.. It's worth overdoing" Well, that was definitely overdoing it Any ideas what caused the machine to perform a self-disassembly like that? Or had the machine just passed it's warrant period

  4. #4
    Join Date
    Aug 2006
    Location
    Sydney
    Age
    65
    Posts
    1,248

    Default

    Hi Steve B,
    Now it wasn't a case of expired warrantee ..time to blow up.
    I recon that as soon as the blade (The one that I failed to retighten) hit the timber it would gone off alignment. I'm not sure at what revs this thing ran at - you can imagine it being bloody fast. Anyway there is very little space between the caseing and these blades so once the blade hits... you can almost picture it in slow motion. Bet you can imagine the look that was on my face too.:eek:

  5. #5
    Join Date
    Jul 2003
    Location
    Mt Druitt NSW
    Age
    65
    Posts
    139

    Default

    Bleeding
    Had you tightened the blades?? Your second post sounds like you believe you didn't :confused: :confused:

    If you did everything OK, I would be holding the blade manufacturer or retailer as possibly responsible. This is not supposed to happen. Retailers shouldn't give advice if they're not qualified to.
    ______________
    Mark
    They only call it a rort if they're not in on it

  6. #6
    Join Date
    Aug 2006
    Location
    Sydney
    Age
    65
    Posts
    1,248

    Default

    No Mark I originally tighten them then I "double checked" them by loosening them to make sure the alignment was good and failed to retighten one side ( I guess anyway ) to prove the check twice rule doesn't nessesarily work all the time.

  7. #7
    Join Date
    Jul 2006
    Location
    Canberra
    Age
    54
    Posts
    265

    Default

    I pray this never happens to me... sounds like you are one lucky black duck!!!

    Pete

Similar Threads

  1. Tight Boots
    By Wood Borer in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 23
    Last Post: 23rd July 2004, 09:26 AM
  2. Tight Skirt
    By Baz in forum JOKES
    Replies: 0
    Last Post: 18th April 2004, 10:35 AM
  3. tight pussy
    By Gino in forum JOKES
    Replies: 0
    Last Post: 14th January 2001, 06:57 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •