![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
-
25th August 2006, 11:26 PM #1
New Member
- Join Date
- Jun 2006
- Location
- Sydney
- Posts
- 8
Sliding Door Installation - Vantage
Hi all,
Stupidly I have assumed the Sliding Door I purchased from a local supplier would have come with an instal manual. It didn't. I have looked on the Vantage website but the link doesn't work. I found the stegbar one is quite good but the bits mine came with don't match anything so I can't really make any sense this way.
Anyhow, if anyone has a copy of the manual or knows where to find it I would appreciate as I need to put the thing together tommorow.
Cheers
Daniel
-
26th August 2006, 08:15 AM #2
Apprentice Carpenter
- Join Date
- Oct 2004
- Location
- Gold Coast
- Age
- 36
- Posts
- 49
Is it a cavity or external slider?
Cavity sliders SUCK to install if youve got 45mm nails. External sliders are easy to do, tell me which one and i might be able to give you a run down.
-
26th August 2006, 12:16 PM #3
New Member
- Join Date
- Jun 2006
- Location
- Sydney
- Posts
- 8
Its an aluminium external door same as this
The problem is not the door into opening detail, it's the actual sliding/fixed door instal bit I need. I know how some of the parts go in but there are two odd shaped bits in particular I need to find out about.
Cheers
Daniel
-
26th August 2006, 02:15 PM #4
Originally Posted by DOZ
-
26th August 2006, 02:20 PM #5
Have a look here this might help in PDF Format.
http://www.vantagealuminium.com.au/c...c=71series.pdf