Results 1 to 2 of 2

Thread: suitable timber

  1. #1
    Join Date
    Nov 2003
    Location
    sthn tablelands nsw
    Age
    75
    Posts
    1

    Default suitable timber

    i wish to make up a window for a gable, the (framed) opening being 880 * 620, using 6mm glass. If I opt for 40mm square stock, would dressed oregon (which I have) be suitable, or should I try to find some wr cedar? - would the weight of the glass be significant in the choice?

  2. #2
    Join Date
    Dec 2001
    Location
    Between a rock & a hard place (vic)
    Posts
    367

    Default

    Oregon would be fine so long as it is protected externally - i.e. primed on all surfaces/cuts and finished in a decent exterior paint. Depending upon how you wish to secure the glass the structural integrity of the window frame should not be an issue so long as the timber window frame is well supported in the existing frame. If you expect a piece of 40x40 to hold up on it's own without adequate support/bracing (esp. underneath) from the surrounding house frame that's a different issue.

    If you wish to use different timber the staff at the Timber Promotion Council (in Victoria) would be able to give you the best advice.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •