Results 1 to 5 of 5
Thread: Mantle Clock Case
-
2nd November 2003, 12:23 PM #1
Intermediate Member
- Join Date
- Oct 2003
- Location
- Mackay,Qld
- Age
- 81
- Posts
- 0
Mantle Clock Case
Hello there , I need advice on re finishing a German mantle clock case that the varnish is lifting (or is that the veneer cracking). Where does a new guy start ? Sanding ? Please help .. Regards Ken Weekes.
-
2nd November 2003, 04:10 PM #2
Supermod
- Join Date
- Jul 1999
- Location
- Brisbane, Qld.
- Age
- 48
- Posts
- 579
Obtain & read Neils book....
-
2nd November 2003, 05:57 PM #3
Life is good with wood!
- Join Date
- Oct 2001
- Location
- Melbourne, Australia
- Posts
- 10
Ken, since you are new to the forum, I think Shane's response to your question was too brief.
Shane is refering to the "bible" of wood finishing, The Polishers Handbook, written and supplied by Neil Ellis.
http://www.ubeaut.com.au/ubhome.htm
It will answer any question you have on finishing and many more that you never ever thought of, nor are likely to.
-
2nd November 2003, 06:19 PM #4
Intermediate Member
- Join Date
- Oct 2003
- Location
- Mackay,Qld
- Age
- 81
- Posts
- 0
German Mantle Clock N o 2 or 3
Ooops , Sorry Guys , I missed the Canadians letter . I should scroll down more, hey. I used to get an old guy to do my cases but now he's gone & 41 yrs of repairing watches & clocks didn't prepare me for all this ( cough , cough) sanding dust . I read your comment first , Shane , & was ready to tell you to go get stuffed but the canadian Saved the day . Since I turned 60 , I seem to have got crankier . Now I'll have to go & get Neils Book . Bye for now & best regards Ken W.
-
2nd November 2003, 09:56 PM #5
Supermod
- Join Date
- Jul 1999
- Location
- Brisbane, Qld.
- Age
- 48
- Posts
- 579
Out of interest who were you using in Mackay?
Reply With Quote
Bookmarks