Results 1 to 15 of 33
Thread: Interviews for members
-
13th August 2006, 03:01 PM #1
Interviews for members
I like this idea on the Sawmill Creek forum of interviewing members. I think it's be useful for would-be woodworkers like myself to hear some of the backgrounds and approaches of the more professional or successful woodworkers on the forum. Perhaps it could be sent to them in the form of a questionnaire and posted to a thread when filled in.
http://www.sawmillcreek.org/forumdisplay.php?f=28
-
13th August 2006, 04:56 PM #2
The minor critiscm of the sawmill creek reviews is that they are predominantly about turners, instead of covering a broad spectrum of woodies.
-
14th August 2006, 09:48 AM #3
What a brilliant idea!!!
So what questions should we put together for our own Questionaire?
Cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
14th August 2006, 02:24 PM #4The minor critiscm of the sawmill creek reviews is that they are predominantly about turners, instead of covering a broad spectrum of woodies.
Here is the master list of interviews to date: http://sawmillcreek.org/showthread.php?t=31388
And here is the link to mine: http://www.sawmillcreek.org/showthread.php?t=32656
Regards from Perth
Derek
-
14th August 2006, 02:51 PM #5.
- Join Date
- Jul 2005
- Location
- Victoria
- Posts
- 0
Originally Posted by derekcohen
-
14th August 2006, 03:24 PM #6
Interviews,
Half of this mob wouldn't get in if we had interviews (Some nameless mods included...)
Seriously, could be interesting to read some of the answersI may not have gone where I intended to go, but I think I have ended up where I needed to be.
My Other Toys
-
14th August 2006, 03:58 PM #7
Anyone care to add / remove any questions?
1. Name (and nick names)
2. Age/DOB
3. Location (present and previous)
4. Tell us about your family, do they like you.
5. How do you earn a living, woodworking or other, any interesting previous occupations, convictions or prison stories.
6. Equipment overview (hand tools and other, no here please)
7. Describe your shed
8. Tell us about the handplanes you own, and your favorites one(s) to use
9. Your favorite cold chisel song.
10. Your favorite handsaw(s).
11. Do you use western tools or Japanese, why do you prefer the ones you use.
12. Do you have a woodworking home page.
13. Do you have any influences in your work. Certain styles or designers you follow/prefer.
14. Do you have any ancestors who were woodworkers that served as inspiration.
15. What is your favorite project, or part of a project, you have ever done and why.
16. Do you believe there is any spiritual dimension to woodworking with handtools, alcoholic or otherwise.
17. How much of your work is done by handtools. Do you use whatever is best for the job or do you use handtools even when they are less efficient.
18. What is your single most favourite tool, and why.Always look on the bright side...
-
14th August 2006, 05:29 PM #8Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 1,460
Originally Posted by HappyHammer
Way too much emphasis on the neanderthal approach to woodworking.
I would prefer a more general approach as to tools, plugin or otherwise, so that the enlightened woodworker that uses the appropriate tool for the specific application can also be included.
Peter.
-
14th August 2006, 06:39 PM #9
I'm not about to give out my full name on the 'net. As I'm one of only nine people in all of Australia with my surname it would be all too easy for some low life to find my shed and all the goodies that it contains. Also as Peter has mentioned it's a bit biased towards the darksiders, hey, I even try to avoid using plug in power tools, preferring to use stationary machinery wherever possible.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
14th August 2006, 07:31 PM #10Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 1,460
Originally Posted by journeyman Mick
I'm like that too Mick. Anyone, anywhere, with the same spelling of my surname is a relation of mine.
A few years ago I saw that some yanks had the same surname as mine and further research showed that they were descendants of my great grandfather's brother who had emigrated to the US in 1910.
Peter.
-
14th August 2006, 07:42 PM #11
I don't understand the point of it. :confused:
I mean, it's the internet Anybody is free to make up any old crap.
If you want to know what a member is about, just read their posts.
-
14th August 2006, 07:45 PM #12
One thing with Sawmill Creek is that members are strongly encouraged to register using their full name. Also if you wnat to be in their version of the Free Stuff Draw you have to be registered with you full name.
I would have no problem with the interviews but why not let people use their forum ID? I know with the couple of forum gatherings I've been too that a lot call each other by their username not real name.
But, the ultimate decision comes from Neil if you want a seperate section. Have to wait till he's said his piece.Have a nice day - Cheers
-
14th August 2006, 08:00 PM #13Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
Originally Posted by HappyHammer
-
14th August 2006, 08:08 PM #14
Randorlf! My long-lost evil twin co-eval life form! So this is where you've been decomposing all this time!
Driver of the Forums
Lord of the Manor of Upper Legover
-
14th August 2006, 08:14 PM #15Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
Yes it has been some time my half brother to my sisters daughter, but I am back.
Whmahahahahahahahahah....etc......
Ran
Bookmarks