Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2006
    Location
    Brunswick West
    Posts
    172

    Default Restumping - Replacing Bearers cost

    Just getting my house stumped now. The guy reckons about 14 metres of bearers need replacing since there is a bit of rot in them. Nothing too drastic mind you but he advised its best to replace them.

    Anyway the story is omn the quote is says $18 per metre to replace bearers. He says now this is not F17 but F8 wood which shrinks so I should go for F17 which is $30 a metre. He says he needs to double them up.

    I rang around and other stumpers are charging aboutr $18 for F17.

    Just wondering what others paid for their restumping and is the guy rippping me off. I told him today Im not paying $30 and he said he will negotiate.

    Cobber

  2. #2
    Join Date
    Jan 2006
    Location
    Melbourne
    Posts
    722

    Default

    I paid $15/m in your area about 10 months ago ... pretty sure it was F17 used. $7/m for plinth boards. They did it better than I expected by actually putting double stumps in the holes under where they had a join between old and new bearers. In the past I have seen then just cut the old bearer at 45 deg. and sit the other on top with 1 stump below ... looks as though it could move a lot more easily.

  3. #3
    Join Date
    Feb 2006
    Location
    vic
    Posts
    174

    Default

    Why dont you have a go at replacing the rotten bearers, I did this at my place as the restumper wanted to charge high prices. A nail gun and sabre saw will help. Unless the floor is near perfect, OB wont make a huge difference, if the existing floors are all over the place, the reblocker probably wont get it that level anyway.

  4. #4
    Join Date
    Feb 2006
    Location
    Brunswick West
    Posts
    172

    Default

    The stumper has already replaced them. $30 seems too high especially when he put in his quote it was $18 and now he sas that was for F8 timber. Im paying him tomorrow but I wont be paying the $30 to replace the bearers.

Similar Threads

  1. Layout Optimization and Cost Estimating Software
    By Roberto Perez F in forum HINTS & TIPS
    Replies: 1
    Last Post: 22nd December 2006, 06:41 AM
  2. replacing brick piers with stumps
    By rscho in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 10
    Last Post: 18th March 2006, 10:10 PM
  3. Cost of Restumping a House in Brisbane
    By brissyguy2 in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 7
    Last Post: 30th December 2005, 08:32 PM
  4. Replacing Bearers and Piers
    By silentC in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 14
    Last Post: 30th April 2004, 04:36 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •