Results 1 to 12 of 12
  1. #1
    Join Date
    May 2006
    Location
    Sydney
    Posts
    0

    Default I will NEVER use Acrylic to paint a table top ever again!!!!

    I finished making a desk for my home office using a old flush door and decided that I would paint the lot with Acrylic paint.......silly me!

    The problem is that almost everything that I place on it "sticks" to the damn painted surface!!!!!

    For example, the base plate of my computer screen is stuck hard and needed a lot of force to remove it. If I put something like a plastic covered article it also sticks and marks the paint.

    I am assuming that there is no "magic" liquid I can wipe over the acrylic paint to make the "stickiness" go away???

    Thanks for any help you can provide.

    Regards
    Greg

  2. #2
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    Put a coat of clear polyurethane over it.
    Stick a little bit of white oil paint in the poly first and you won't get a yellowed finish.
    Regards, Bob Thomas

    www.wombatsawmill.com

  3. #3
    Join Date
    May 2006
    Location
    Sydney
    Posts
    0

    Default

    Thanks

    I am assuming you mean a non acrylic based clear?

    Greg

  4. #4
    Join Date
    Nov 2004
    Location
    Port Pirie SA
    Age
    52
    Posts
    0

    Default

    The acrylic was it a cheap or good brand?
    ....................................................................

  5. #5
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    A turps based clear.
    Some of the water clears stay a bit tacky too.
    Regards, Bob Thomas

    www.wombatsawmill.com

  6. #6
    Join Date
    May 2006
    Location
    Sydney
    Posts
    0

    Default

    British Paints Gloss Interier Acrylic...

  7. #7
    Join Date
    Nov 2004
    Location
    Port Pirie SA
    Age
    52
    Posts
    0

    Default

    My and Ian007's uncle seem's to think BP paint is good stuff(err thats Rolf).
    Maybe its a crook batch or something... how old is the paint.
    The only thing to do is strip it and redo it with different paint, but contact BP and tell them they may even supply some replacement product?
    ....................................................................

  8. #8
    Join Date
    May 2006
    Location
    Sydney
    Posts
    0

    Default

    The paint is new. I will contact BP and see what they say.

  9. #9
    Join Date
    May 2004
    Location
    Mooroolbark VIC
    Age
    80
    Posts
    0

    Default

    More importantly, what was the door painted with before your coat of acrylic? If it was oil based paint that's where your trouble stems from. The only sure way to overcome it now is to give it a good sanding, then use oil based undercoat followed by oilbased satin or gloss enamel, applied with a roller and then lay it off with a good brush.

  10. #10
    Join Date
    May 2006
    Location
    Sydney
    Posts
    0

    Default

    The door was totally stripped back to bare wood and then undercoat/primer was applied prior to the topcoat....I basically did everything by the book.

  11. #11
    Join Date
    May 2004
    Location
    Mooroolbark VIC
    Age
    80
    Posts
    0

    Default

    well in that case it must be the paint - it shouldn't be sticky like that.

  12. #12
    Join Date
    May 2006
    Location
    Sydney
    Posts
    0

    Default

    Yeah, I am going to give British Paints a call ....

    Greg

Similar Threads

  1. Spraying Acrylic paint on MDF
    By pwill in forum FINISHING
    Replies: 8
    Last Post: 15th November 2005, 11:15 AM
  2. Finishing a marri table top
    By grizzly_b in forum FINISHING
    Replies: 2
    Last Post: 9th December 2003, 05:08 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •