Page 1 of 3 123 LastLast
Results 1 to 15 of 40

Thread: Give Shed

  1. #1
    Join Date
    Oct 2003
    Location
    Romsey Victoria
    Age
    63
    Posts
    2,102

    Default Give Shed

    We'll be settling on our new block in Lancefield in September.

    I have my priorities right and I'm building the shed first. Well actually, were building that so we can live in it while we build the house.

    My plan so is to buld a shed with internal dimensions of 12m x 6m.
    We'll put the slab down and the structure and roof and then I'll in-fill with straw bales and then render outside and then in. I'm doing the strawbale as practice for when we build the house.

    At one end I'll have 2 rooms of about 3 x 3 metres each. One willl be my office and the other will be a finishing room. I'll just do a stud wall to separate the rooms and the shed. I'm going to fit a toilet and shower in there somewhere.

    The south wall will have small double glazed windows and the north will have a series of narrow floor to ceiling windows to allow for solar passive heating.

    The roof will be colourbond. I haven't decided what kind of insulation to use. When we build the house I'll be using Rytek roofing which is two colourbond sandwiching a 10cm thick piece of polystyrene. It cost somewhere between $120 and $150 per square metre installed. It sounds exe but you don't have to pay for a ceiling, insulation or roof trusses.

    I don't think I can afford to do this for the shed though.

    What insulation have other people used for their sheds?

    Also, I haven't decided on what do do for the floor. I'm not all that fond of standing for hours on concrete but it is very effective as a thermal mass for passive solar heating.

    If I put a wood floor over the top then I'll lose the thermal mass benefit. If I stay with concrete then my poor little footsies will get sore.

    What is a man to do?





    Photo Gallery

  2. #2
    Join Date
    Jul 2003
    Location
    Near Bodgy, AlexS, Wongo & CraigB
    Age
    19
    Posts
    744

    Default

    Quote Originally Posted by Grunt

    What insulation have other people used for their sheds?


    none in my shed. ya soft mexican:eek: (hccct ptooewy!)

    Quote Originally Posted by Grunt
    What is a man to do?
    if you leave it concrete your claws will not need clipping as often.
    Zed

  3. #3
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    Get a pair of thick socks
    Regards, Bob Thomas

    www.wombatsawmill.com

  4. #4
    Join Date
    Jun 2003
    Location
    ...
    Posts
    1,460

    Default

    Quote Originally Posted by Grunt
    What insulation have other people used for their sheds?
    I've insulated my workshop with fiberglass insulating bats and the finishing shed with those silver insulation sheets and insulating ceiling tiles ( freebie from a renovation ).

    Quote Originally Posted by Grunt
    Also, I haven't decided on what do do for the floor. I'm not all that fond of standing for hours on concrete but it is very effective as a thermal mass for passive solar heating.

    If I put a wood floor over the top then I'll lose the thermal mass benefit. If I stay with concrete then my poor little footsies will get sore.
    I would prefer a timber floor above the concrete floor (room to place D/C ducting and power cables to fixed machinery so no extension cords) but haven't the head height, so I have put foam rubber interlocking tiles in the workshop area and foam backed carpet in the finishing shed.


    The money spent on insulation and flooring will repay you for many years in extra comfort and IMO worth more to me than some tools I've bought.


    Peter.

  5. #5
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Quote Originally Posted by Grunt
    I'll be using Rytek roofing which is two colourbond sandwiching a 10cm thick piece of polystyrene. It cost somewhere between $120 and $150 per square metre installed. It sounds exe but you don't have to pay for a ceiling, insulation or roof trusses.
    Do you have a link for the roofing?

    I would do the concrete floor and use the rubber tiles that Sturdee suggested.

    Al

  6. #6
    Join Date
    Feb 2005
    Location
    East Bentleigh, Melbourne, Vic
    Age
    68
    Posts
    180

    Default

    Quote Originally Posted by Grunt
    Also, I haven't decided on what do do for the floor. I'm not all that fond of standing for hours on concrete
    G'day Mate,

    Good news on the new home and shed!

    Re the concrete floor, I've put down some rubber ribbing in the key areas where I work for any lenghth of time - eg in front of the benches, ditto Router table, jointer, etc.

    I can't recall the $/m at Bunnings, but I found the same stuff in 1 ~ 2m lenghths in their off-cut bin for about 20% of the price

    I just lift the pieces out of the way when I get around to sweeping/vacuuming the shed floor...

    Love to see some WiP pics and notes both on the shed and the house.

  7. #7
    Join Date
    Oct 2003
    Location
    Kentucky NSW near Tamworth, Australia
    Age
    86
    Posts
    1,067

    Default

    Quote Originally Posted by Grunt
    The roof will be colourbond. I haven't decided what kind of insulation to use. When we build the house I'll be using Rytek roofing which is two colourbond sandwiching a 10cm thick piece of polystyrene. It cost somewhere between $120 and $150 per square metre installed. It sounds exe but you don't have to pay for a ceiling, insulation or roof trusses.

    Grunt

    Because I am involved with Spanline we have the option to use the sandwich panel but the franchise owner has opted to not use it because of delaminating problems from the movements from contraction and expansion from the heat and the cold.

    Instead they use the plain roofing and then use a separate ceiling panel that is available which is an aluminium imbossed painted surface on the underside and aluminuim foil adhered to the topside. It will span 4.00 metres unsupported but is available in 6 metre lengths x 1200 wide with an interlocking side join.

    There have been several companies gone broke from the claims on the roofs delaminating

  8. #8
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    I thought it sounded too good to be true, no tusses.

    Al

  9. #9
    Join Date
    Oct 2003
    Location
    Romsey Victoria
    Age
    63
    Posts
    2,102

    Default

    Thanks Baz, I'll check that out.

    Al, here is the link. http://www.ritek.net.au/
    Sorry can't spell. It's Ritek not Rytek.

    Chris
    Photo Gallery

  10. #10
    Join Date
    Jun 2006
    Location
    The Sticks
    Age
    53
    Posts
    14

    Default

    There's another similar product here in Victoria called Tridek http://www.infolink.com.au/Showcases...ildings/137574
    Can span unsupported up to 8m with an R3.0 rating, seems to be a great concept but just not sure how well it works in the field.
    Live a little today before you die forever tomorrow

  11. #11
    Join Date
    Jul 2003
    Location
    Gorokan Central Coast NSW
    Age
    80
    Posts
    941

    Default

    Get the render on the straw bales real quick, rember the neddy. Munch Munch.

  12. #12
    Join Date
    Aug 2004
    Location
    Melbourne
    Age
    53
    Posts
    121

    Default

    Have just installed R6.4 rated silver foil batts. Works by blocking radiant heat like space blankets but in box section batts.

    Their advertising speil states stops 100% net heat gain during summer and retains 86% net heat loss during winter.

    Check out www.silverbatts.com for contact details

  13. #13
    Join Date
    Sep 2002
    Location
    Paignton. Devon. U.K.
    Posts
    1,611

    Default

    Grunt why not go the olde Pomme way, A thatched roof, the trusses don't seem very heavy to me when I've seen rethatching being done.
    woody U.K.

    "Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln

  14. #14
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    Quote Originally Posted by jow104
    Grunt why not go the olde Pomme way, A thatched roof, the trusses don't seem very heavy to me when I've seen rethatching being done.
    So you wanna give lessons when you arrive here?
    Regards, Bob Thomas

    www.wombatsawmill.com

  15. #15
    Join Date
    Sep 2002
    Location
    Paignton. Devon. U.K.
    Posts
    1,611

    Default

    Regret to say my 6 month visa says I must not undertake any action that normally attracts renumeration!!!!!!!!!

    Canberra are getting very cagey.
    woody U.K.

    "Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln

Similar Threads

  1. Garden shed - keeping it cool
    By srspom in forum THE GARDEN SHED
    Replies: 10
    Last Post: 26th March 2007, 08:13 PM
  2. Planning the new Shed
    By vsquizz in forum THE GARDEN SHED
    Replies: 18
    Last Post: 17th August 2004, 07:21 PM
  3. Cold days in the shed
    By Toggy in forum HAVE YOUR SAY
    Replies: 7
    Last Post: 6th August 2004, 11:21 AM
  4. New Shed
    By Wood Borer in forum GENERAL ODDS N SODS
    Replies: 19
    Last Post: 25th June 2003, 03:20 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •