Results 1 to 7 of 7
  1. #1
    Join Date
    Jun 2006
    Location
    Perth WA
    Posts
    14

    Lightbulb Bathroom window exhaust fan

    Does anyone know where in Perth I can buy a window exhaust fan cheaply? Been to a few Bunnings, all they have are the ceiling exhaust fans. Also for bathroom window, who would you recommend to get a "window" done up with holes for the fan?

    Thanks alot

  2. #2
    Join Date
    Apr 2006
    Location
    Hobart
    Posts
    126

    Default

    I put window fans in bathroom and laundry some years ago.

    Any electrical wholesaler will stock window fans. Usually better quality and prices than the warehouse barns.

    Any glazier will be able to supply the glass and cut the panel to size including the circular hole. He will also ensure that it complies with standards - from memory, I think the glass must be 5mm or thicker.

    Alternatively you can replace the glass with polycarbonate (Lexan) and cut it yourself with a jigsaw. However Lexan, whilst so strong it is used as bullet proof glass, will scratch fairly easily.

    When you put in the fan you might like to consider wiring it in parallel to the lights so that the light switch operates both the light and the fan. People tend to forget the fan and leave it running, but always switch the lights off. The separate switch on the fan means you can switch it off when the lights are on if you want.

    Cheers

    Graeme

  3. #3
    Join Date
    Apr 2005
    Location
    Aberglassly,NSW
    Age
    80
    Posts
    0

    Default

    Quote Originally Posted by GraemeCook
    I put window fans in bathroom and laundry some years ago.

    Any electrical wholesaler will stock window fans. Usually better quality and prices than the warehouse barns.

    Any glazier will be able to supply the glass and cut the panel to size including the circular hole. He will also ensure that it complies with standards - from memory, I think the glass must be 5mm or thicker.

    Alternatively you can replace the glass with polycarbonate (Lexan) and cut it yourself with a jigsaw. However Lexan, whilst so strong it is used as bullet proof glass, will scratch fairly easily.

    When you put in the fan you might like to consider wiring it in parallel to the lights so that the light switch operates both the light and the fan. People tend to forget the fan and leave it running, but always switch the lights off. The separate switch on the fan means you can switch it off when the lights are on if you want.
    Cheers

    Graeme
    As Graeme says

    The electrical wholesaler also sell a switch which turns the lights and the fan on and when the lights are switched off the fan contiues to run for a adjustable time after. Sorry I cann't remember the part number

  4. #4
    Join Date
    May 2006
    Location
    Melbourne
    Age
    54
    Posts
    150

    Default

    Clipsal also make an automatic bathroom fan that has a humidity sensor so it only turns on when it's needed.

  5. #5
    Join Date
    Aug 2004
    Location
    Brisbane
    Posts
    777

    Default

    Wow this is great timing, sorry to hijack, but do you know of one that would fit in a glass block wall?

    Cheers
    Michael

  6. #6
    Join Date
    May 2006
    Location
    Melbourne
    Age
    54
    Posts
    150

    Default

    Not sure exactly about the mounting of them, I haven't really looked into them that much yet, just something I came across looking at their web site.
    http://www.clipsal.com.au/consumer/p...s/exhaust_fans

    The also have a timer that will run a fan for a set time after you turn it off, great for the loo.

    There's a also brochure on their site about the smart fans http://www.clipsal.com.au/consumer/downloads/brochures

  7. #7
    Join Date
    Jun 2006
    Location
    Perth WA
    Posts
    14

    Default

    Thanks alot everyone. Will try and suss out some of the electrical wholesalers, anyone recommends any in Perth?

Similar Threads

  1. Bathroom Window
    By Hootsmon in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 3
    Last Post: 23rd May 2005, 09:55 AM
  2. Bathroom Window Codes
    By JamesD in forum BATHROOM & TOILET
    Replies: 8
    Last Post: 1st May 2005, 12:57 AM
  3. Installing glass bricks in bathroom window
    By TK1 in forum BATHROOM & TOILET
    Replies: 5
    Last Post: 14th January 2005, 08:45 AM
  4. Cutting a window into an internal brick wall
    By dalejw in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 4
    Last Post: 11th January 2005, 08:00 PM
  5. Exhaust Fan Advice
    By craigb in forum GENERAL ODDS N SODS
    Replies: 6
    Last Post: 26th March 2004, 11:30 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •