Results 1 to 3 of 3
-
16th June 2006, 01:48 AM #1
New Member
- Join Date
- Jun 2006
- Location
- Perth
- Posts
- 1
Trimming bottom of cornice - best tools / techniques?
I need to trim 10mm from the bottom of a cornice to fit in a wall mounted airconditioner. The unit is about 1m long. What would be the best way to do this? Not sure I'm happy to attack it with a chisel!
-
16th June 2006, 12:29 PM #2
SENIOR MEMBER
- Join Date
- Jan 2005
- Location
- Newcastle/Tamworth
- Posts
- 416
Shump, just check the clearances that are required around the machine, you could probably use a stanley knife with a metal ruler if needed
Cheers
Pulse
-
16th June 2006, 08:18 PM #3
GOLD MEMBER
- Join Date
- Jul 2005
- Location
- Ipswich QLD
- Age
- 55
- Posts
- 177
cornice.
As pulse has said. I would go the stanley knife and stell rule option as well.
Dave,
hug the tree before you start the chainsaw.
Reply With Quote
Similar Threads
-
Fixing Cornice
By ausdesign in forum PLASTERINGReplies: 16Last Post: 15th May 2006, 08:45 PM
Bookmarks