Results 1 to 4 of 4

Thread: Jointer safety

  1. #1
    Join Date
    May 2005
    Location
    New Zealand (Palmerston North)
    Age
    62
    Posts
    0

    Default Jointer safety

    G'day All

    I was out in the shed running some maple over my jointer (which I don't use that often) - 4 inch wide, 3/4 inch thick and 40 inches long. No problems. Then I beveled a nice 16 degree angle on the edge of a shorter bit - 10 inches long. No problems.

    Then I thought to meself - I don't really know what I'm doing with this thing so lets go and have a read on the net to refresh my memory about the hazzards of jointing/planing.

    There is lots of stuff like this (most of which I know but don't always practice):

    Jointers

    • Check that the guard has sufficient tension to cover the part of the cutter head not covered by stock.

    • Do not use a jointer with dull knives.

    • Do not attempt to joint stock that has knots, nails, etc.

    • Do not use a jointer to plane stock shorter than 10", narrower than 2", or thinner than 3/8".

    • With power off, check that blades are flush with the out-feed table and securely fastened in the cutter head.

    • Feed stock into a jointer "with the grain".

    • Keep a firm grip on stock to prevent kickback. Position your body to the side of the machine; never stand to the front (feed side) of the table.

    • Do not allow fingers to drag behind or along edges of stock.

    • Do not use a jointer to plane the grain-end of stock that is narrower than 12".
    Well, I have just broken several of the rules I guess. I'd like to use all manner of safety devices to keep the fingers out of trouble but I can't see how you can when you are planing the side of a board. I try to use a home-made push block with a non-slip pad on the bottom to surface plane (I haven't got a thicknesser and use the jointer a bit for making boards a bit thinner). Why is there no planing of wood less than 2 inches wide?

    Anyway, are there any really good sites that describe the way a jointer (or planer or what ever else they are called) should be used safely (with pictures). For instance, how do you put even downward pressure on the edge of a board using a push stick:confused: ? How do you really keep your fingers 12 inches away from the cutters? How do you feed smoothly and still keep your hands from going over the cutters when putting a bevel on a relatively short bit of wood as I described earlier.
    Cheers from NZ


    Richard

  2. #2
    Join Date
    Aug 2003
    Location
    Perth, WA
    Posts
    0

    Default

    Quote Originally Posted by RichardL
    How do you feed smoothly and still keep your hands from going over the cutters when putting a bevel on a relatively short bit of wood as I described earlier.
    Use two of these

    Growing old is much better than the alternative!

  3. #3
    Join Date
    Aug 2005
    Location
    Murraylands, S.A.
    Posts
    14

    Default

    Richard trust me they can be a nasty machine!! See my thread titled "the loss of a finger"

    I learnt it the hardway .

    Regards
    Allan

  4. #4
    Join Date
    May 2005
    Location
    New Zealand (Palmerston North)
    Age
    62
    Posts
    0

    Default

    Quote Originally Posted by swiftden
    Richard trust me they can be a nasty machine!! See my thread titled "the loss of a finger"

    I learnt it the hardway .

    Regards
    Allan
    Yes, I have read a few horror stories and I guess that is partly what has prompted the question.

    Sprog - I have one of these but will get 2. Still not clear how you plane the side of a board using them but perhaps its just practice. I made myself a decent pushstick too so I'll probably use it more than the grotty one I used to use.
    Cheers from NZ


    Richard

Similar Threads

  1. Biscuit Jointer Safety
    By John Saxton in forum HINTS & TIPS
    Replies: 1
    Last Post: 17th January 2002, 05:19 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •