65mm Cove Cornice in Canberra

[Bulli]

Does anyone know where I can source a small length (<300mm) of 65mm cove cornice in Canberra? It seems that the only sizes the big chains have (including Gyprock) are 55mm, 75mm and 90mm.

While I'm not a cornice expert, I'm pretty sure the size is 65mm - it could be 2 1/2 in, but as the house was built in 1971, I suspect it's in the new money.

Thanks,

Bulli

[ThePope]

Not sure 65mm is around, all I see is 55 and 90mm.

You could wander around Gungahlin and see if there is an offcut to be had on a new house going up. Could also go to Boral in Fyswick, prob have a damaged length lying around you'd get for zich.

[JDub]

Found any yet?

I might still have some lying around from a dividing wall I removed last year (not sure of the cornice size, will have to check, but its from a 1970s built home so it might match).

PM me if you havnt found it and I will have a hunt around in the roof for you (I think thats where I put it )

Joel

[Bulli]

Thanks Joel

Yep, after quite a bit of asking around, someone suggested Modern Plaster in Queanbeyan. Had to buy 3600mm of it, but you never know - it might come in useful one day.