Results 1 to 11 of 11
Thread: wall vents
-
13th May 2006, 10:08 PM #1Intermediate Member
- Join Date
- Jan 2006
- Location
- Melbourne
- Posts
- 38
wall vents
Hi all,
We have an old cavity brick house with 3m high walls and 2 or 3 wall vents in most rooms. The vents are flush with the wall and are very plain so we're planning to fix some decorative plaster vents over the existing vents. As its getting colder it occured to us that alot of our warm air is escaping into the roof space so before installing decorative vents we were planning to carve out a section at the back of the plaster vents where we can slot in a piece of plastic or plywood from above to cover the vent holes and trap warm air inside. Then when it gets warmer we can remove the plastic or plywood to allow hot air to be drawn out by the out roofspace whirly thingy.
Can anyone see any problems with covering wall vents over the winter? We have both ducted (ceiling) and gas heating. Thanks in anticipation!
-
13th May 2006, 10:12 PM #2
-
13th May 2006, 10:22 PM #3
There are thousands of new homes that have gas heating and don't have vents in the rooms and dont have any problems.
-
13th May 2006, 11:06 PM #4
People have died because of well sealed rooms.
For that reason vents were mandatory under the vic building regs.
That was scrubbed when we got national uniformity of building regs.
And people have died in recent years, since the uniform regs came in.
and would have not occurred with wall vents.
-
14th May 2006, 01:16 AM #5Senior Member
- Join Date
- Feb 2006
- Location
- Hicksville
- Posts
- 124
Originally Posted by echnidna
-
14th May 2006, 08:28 PM #6Intermediate Member
- Join Date
- Jan 2006
- Location
- Melbourne
- Posts
- 38
Originally Posted by echnidna
I wasn't aware that wall vents are no longer required in new houses. So if "exposed flame type" flued gas heaters are OK for them I would think we shouldn't have a problem? Can any flueless indoor gas heating appliances meet Australian Standards if wall vents are no longer required?
Thanks for all the replies.
-
15th May 2006, 05:23 PM #7New Member
- Join Date
- May 2006
- Location
- perth
- Posts
- 4
resant studies have showed that gas heater aare a major cause of flue in people buy have a vent near the gas heater and one on the other side of room reduces chances of flue like symptons and hospital.
-
15th May 2006, 05:39 PM #8
If you're worried about fumes, just open a window. I doubt many houses are actually air tight, with or without vents.
"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
15th May 2006, 05:44 PM #9Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
-
17th May 2006, 10:12 AM #10Originally Posted by broadstar44I want to die peacefully in my sleep like my grandfather, not screaming in terror like the passengers in his car.
-
1st June 2006, 11:38 PM #11New Member
- Join Date
- Jun 2006
- Location
- melbourne
- Posts
- 9
In victoria i was told by jetmaster fireplaces, that you must have one or two vents to external wall of house with any open flame gas fire.
that includes a fireplace that already has a chimney or vent already.
we are added a gas flame into the existing wood fire and must keep the vents even though we would like to remove them.
I said this cant be the case with a chimney but they said it was law that open gas fires have both.
anyone confirm this.
thanks michael
Similar Threads
-
Rendering a wall - how to
By Big Clint in forum RENDERINGReplies: 15Last Post: 15th January 2009, 11:19 AM -
Retaining Wall
By Flyboy in forum LANDSCAPING, GARDENING, OUTDOORSReplies: 3Last Post: 12th February 2006, 08:00 AM -
Cutting a window into an internal brick wall
By dalejw in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 4Last Post: 11th January 2005, 08:00 PM
Bookmarks