Results 16 to 25 of 25
Thread: Ridge capping on shed roof
-
25th April 2006, 10:43 PM #16
It may not seem that much could get under a properly scribed ridge cap BUT
I was in a roof last week with a prety well scribed ridge and alll the way down the middle of the cieling was a thick scatering of fine vegitable debris.
Not whole gum leaves as such bit little bets of fibre from the flowers, eucalipt caps, tiny bits of twig and little leaves like from a leopard or poinciana tree.
This would have been at least 22.5deg pitch.
Over a long period this accumulation can get quite substantial. I have seen this in a number of cielings over the years. Tile rooves with no sarking can be realy filty places if there are trees with fine folage near by.
cheersAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
26th April 2006, 09:48 AM #17
I would either use expanding foam, which works well if not exposed to the sun.
Or a good silicone, depending on the gap.
I never scribed the capping for my shed, just the bent the valleys in the corru sheets.
I cannot tell whether the gum flowers are getting in as I have placed sarky on top of the rafters.
Good Luck with the office in the shed.
Pulpo
-
26th April 2006, 11:10 AM #18
Chris source either Laserlite brand foam infill that is cut to the corrugated profile one side & flat the other side; or Diggers brand bitumen impregnated foam strips with the same profile, ie. flat one side & corr the other.
You could get them from your local hardware or building centre, or both are available at Bunnings in the indoor timber section.
Loosen/remove the screws holding the ridge cap down, insert the foam strips, under the edge of the cap, & screw back down.
Cheers mate............Sean, eats roots & leaves
The beatings will continue until morale improves.
-
26th April 2006, 11:37 AM #19
thanks you lot
G'day,
Thanks everyone for your help.
Looks like I'll be checking out Bunnies and the joint at Ringwood that Sturdee mentioned. Thanks, Scooter for giving me the names of the stuff, it saves me when I go to Bunnies and sometimes having forgotten or not knowing the name of what I'm after and calling it a "thingymebob" or the "whatchacallit", did that once with something so simple that I felt like an old man with dementia (maybe that's what my grey hairs have been trying to tell me )
-
26th April 2006, 11:23 PM #20Senior Member
- Join Date
- Jun 2003
- Location
- brisbane
- Posts
- 200
I was shocked when first found out the southern states don't scribe their flashings. Ever if they don't get the same weather and unscribed ridge just doesn't look finished.
-
26th April 2006, 11:58 PM #21
G'day julianx,
That shocks you, what shocked me moving down here from Brisbane is how flaming cold it is down here. Still don't know why I moved down, nah it's OK, just the cold is something you don't get uesd to.
-
27th April 2006, 12:12 AM #22Originally Posted by julianxCheers
Wayne
-
27th April 2006, 12:21 AM #23Originally Posted by Waldo
mind you The Alice gets very brisk some nights.
Get a sawdust burner in yer shed, gets ridda rubbish and warms it all up.
-
27th April 2006, 12:52 AM #24Originally Posted by julianx
Originally Posted by echnidna
- Andy Mc
-
27th April 2006, 01:32 AM #25
G'day Echidna,
I've been in Armidale - that has to be the coldest place in the joint. Horribly cold there, so's Toowoomba, but not as bad.
Similar Threads
-
Garden shed - keeping it cool
By srspom in forum THE GARDEN SHEDReplies: 10Last Post: 26th March 2007, 08:13 PM -
pergola roof over tile house roof
By Lbudgie in forum PERGOAS, GAZEBOS, STROMBELLAS & ROTUNDASReplies: 3Last Post: 24th March 2006, 05:58 PM -
Long span garage roof deck, more thoughts
By Wildman in forum DECKINGReplies: 4Last Post: 29th September 2004, 08:00 PM
Bookmarks