Page 2 of 2 FirstFirst 12
Results 16 to 25 of 25
  1. #16
    Join Date
    Apr 2002
    Location
    Brisbane
    Posts
    0

    Default

    It may not seem that much could get under a properly scribed ridge cap BUT
    I was in a roof last week with a prety well scribed ridge and alll the way down the middle of the cieling was a thick scatering of fine vegitable debris.
    Not whole gum leaves as such bit little bets of fibre from the flowers, eucalipt caps, tiny bits of twig and little leaves like from a leopard or poinciana tree.
    This would have been at least 22.5deg pitch.

    Over a long period this accumulation can get quite substantial. I have seen this in a number of cielings over the years. Tile rooves with no sarking can be realy filty places if there are trees with fine folage near by.

    cheers
    Any thing with sharp teeth eats meat.
    Most powertools have sharp teeth.
    People are made of meat.
    Abrasives can be just as dangerous as a blade.....and 10 times more painfull.

  2. #17
    Join Date
    Mar 2002
    Location
    Sydney, NSW
    Posts
    98

    Default

    I would either use expanding foam, which works well if not exposed to the sun.

    Or a good silicone, depending on the gap.

    I never scribed the capping for my shed, just the bent the valleys in the corru sheets.

    I cannot tell whether the gum flowers are getting in as I have placed sarky on top of the rafters.

    Good Luck with the office in the shed.

    Pulpo

  3. #18
    Join Date
    May 2004
    Location
    Pakenham, outer Melb SE suburb, Vic
    Age
    55
    Posts
    549

    Default

    Chris source either Laserlite brand foam infill that is cut to the corrugated profile one side & flat the other side; or Diggers brand bitumen impregnated foam strips with the same profile, ie. flat one side & corr the other.

    You could get them from your local hardware or building centre, or both are available at Bunnings in the indoor timber section.

    Loosen/remove the screws holding the ridge cap down, insert the foam strips, under the edge of the cap, & screw back down.


    Cheers mate............Sean, eats roots & leaves


    The beatings will continue until morale improves.

  4. #19
    Join Date
    Mar 2005
    Location
    In the shed, Melbourne
    Age
    53
    Posts
    0

    Thumbs up thanks you lot

    G'day,

    Thanks everyone for your help.

    Looks like I'll be checking out Bunnies and the joint at Ringwood that Sturdee mentioned. Thanks, Scooter for giving me the names of the stuff, it saves me when I go to Bunnies and sometimes having forgotten or not knowing the name of what I'm after and calling it a "thingymebob" or the "whatchacallit", did that once with something so simple that I felt like an old man with dementia (maybe that's what my grey hairs have been trying to tell me )
    I make things, I just take a long time.

    www.brandhouse.net.au

  5. #20
    Join Date
    Jun 2003
    Location
    brisbane
    Posts
    200

    Default

    I was shocked when first found out the southern states don't scribe their flashings. Ever if they don't get the same weather and unscribed ridge just doesn't look finished.

  6. #21
    Join Date
    Mar 2005
    Location
    In the shed, Melbourne
    Age
    53
    Posts
    0

    Default

    G'day julianx,

    That shocks you, what shocked me moving down here from Brisbane is how flaming cold it is down here. Still don't know why I moved down, nah it's OK, just the cold is something you don't get uesd to.
    I make things, I just take a long time.

    www.brandhouse.net.au

  7. #22
    Join Date
    Jan 2005
    Location
    Canberra
    Posts
    161

    Default

    Quote Originally Posted by julianx
    I was shocked when first found out the southern states don't scribe their flashings.
    Who told you that.
    Cheers
    Wayne

  8. #23
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    Quote Originally Posted by Waldo
    G'day julianx,

    That shocks you, what shocked me moving down here from Brisbane is how flaming cold it is down here. Still don't know why I moved down, nah it's OK, just the cold is something you don't get uesd to.
    Mate you aint been cold till yer spend a weekend in Ballarat or New England,
    mind you The Alice gets very brisk some nights.

    Get a sawdust burner in yer shed, gets ridda rubbish and warms it all up.
    Regards, Bob Thomas

    www.wombatsawmill.com

  9. #24
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    64
    Posts
    0

    Default

    Quote Originally Posted by julianx
    I was shocked when first found out the southern states don't scribe their flashings. Ever if they don't get the same weather and unscribed ridge just doesn't look finished.
    Cowboys will be cowboys, no matter what state they're in.

    Quote Originally Posted by echnidna
    Mate you aint been cold till yer spend a weekend in Ballarat or New England,
    I spent 2 years t'other side of Ballaraat (Blampied) and I gotta agree with you about the place. I never believed in black ice until I rode the harley out thru the Swiss Alps one cold, chill morning. $ad memorie$.
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  10. #25
    Join Date
    Mar 2005
    Location
    In the shed, Melbourne
    Age
    53
    Posts
    0

    Default

    G'day Echidna,

    I've been in Armidale - that has to be the coldest place in the joint. Horribly cold there, so's Toowoomba, but not as bad.
    I make things, I just take a long time.

    www.brandhouse.net.au

Similar Threads

  1. Garden shed - keeping it cool
    By srspom in forum THE GARDEN SHED
    Replies: 10
    Last Post: 26th March 2007, 08:13 PM
  2. pergola roof over tile house roof
    By Lbudgie in forum PERGOAS, GAZEBOS, STROMBELLAS & ROTUNDAS
    Replies: 3
    Last Post: 24th March 2006, 05:58 PM
  3. Long span garage roof deck, more thoughts
    By Wildman in forum DECKING
    Replies: 4
    Last Post: 29th September 2004, 08:00 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •