Results 16 to 30 of 30
Thread: Mineral spirits
-
3rd June 2003, 12:28 PM #16
Thanks Mate,I'll stick with the Guinness.
Makes a nice wood stain too!!
Chiz.I Love The Smell Of Sawdust In The Morning,
It Smells Like....Victory!
-
3rd June 2003, 03:48 PM #17
The Mineral Spirits of USA equates in Australia to Mineral Turpentine, also known as petro pine or just plain turps.
The closest thing to turps is White Spirits also used for most of the same things, it a little cheaper (or used to be) and supposedly has less smell than the turps. Both turps and white spirits are pertochemicals and both are 100% Liquid Hydrocarbons.
Pure turpentine (or gum turpentine) is distilled from turpentine pine trees and as AlexS rightly said, it can rattle your brain. It is thought to be a cause kidney failure if abrorbed through the pores of the skin. It can cause many mental problems and is one of the reasons why so many of the great artists were certifiable nut cases. Don't be fooled into thinking that natural is always better. Often times is definitely is not.
Naptha is different again and is a combination of aliphatics, xylene and ethylbenzene and has an unmistakeable smell of napth (moth balls). It also has some pretty nasty medical side effects.
Hope this has helped a little bit and not thrown more confusion into the debate.
Cheers - Neil
-
3rd June 2003, 05:41 PM #18SENIOR MEMBER
- Join Date
- Jan 2003
- Location
- Osaka
- Posts
- 346
So I was right then?
-
3rd June 2003, 06:05 PM #19
:confused:
So someone finish this table
USA Oz
Mineral Spirits ?
Pure Turpentine ?
Mineral Turps ?
Naptha based spirits ?Great minds discuss ideas,
average minds discuss events,
small minds discuss people
-
3rd June 2003, 07:49 PM #20Member
- Join Date
- Jan 2001
- Location
- Caboolture,QLD,Australia
- Posts
- 12
well I am also now completely confused.
In my shed I have bottles of Turps (mineral); Metho ( metholated spirits); Shellite; Dry Cleaning Fluid; and white spirits. None smell the same.
Interestingly, the Metho is labelled "contains 99% ethanol.
They all come from the "Grange" company.
Regards
Dod
-
3rd June 2003, 10:18 PM #21
Neil
Thanks mate. You've answered the original question. Well, I said it was a basic question in the original post but - hell's teeth! - it didn't have a simple answer, did it?
Oz and the US, two nations separated by a common language!
Now here's one that has nothing at all to do with wood but just for the hell of it: why do the Americans leave an "i" out and turn aluminium into aluminum?
Driver
-
3rd June 2003, 10:55 PM #22Originally posted by Sir Stinkalot
Mixed with a little orange juice over ice it doesn't taste that bad ... it depends on how cheap you like your drinks.
Mick
-
3rd June 2003, 11:09 PM #23SENIOR MEMBER
- Join Date
- Jan 2003
- Location
- Osaka
- Posts
- 346
Now here's one that has nothing at all to do with wood but just for the hell of it: why do the Americans leave an "i" out and turn aluminium into aluminum?
Now methylated spirits is ethanol that has methyl alcohol added to it, therfore "methylated". This is done so the government can continue to collect taxes through the sale of alcohol. Other than that, no reason for it.
TUT TUT!!!! .Last edited by RETIRED; 3rd June 2003 at 11:56 PM.
-
8th June 2003, 08:32 AM #24Intermediate Member
- Join Date
- Feb 2003
- Location
- Adelaide, S Aust
- Posts
- 1
I have seen on a couple of US shows where they used and recommended "mineral oil" to stain their cutting boards.
Is this the same stuff?
Or is it something else.
Regards
Alex
-
8th June 2003, 10:18 AM #25
Mineral Oil is mainly sold in Australia as paraffin oil, a clear pretty well odourless liquid. It is available from the supermarkets, chemists and some hardware shops. Its main claim to fame is that it does not dry or skin like most oils, so it is excellent for use as the oil for lubrication during french polishing. It is basically non toxic and will not go rank or toxic like most vegetable oils will in time. However it is entirely impractical for use as a finishing oil because of its non drying characteristics. It is often used as an initial oiling of food implements purely for aesthetic purposes, it usually disappears with the first washing of the implement which anyone with any brains will do before the use it for the first time.
Hope this is of some help.
Cheers - Neil
PS Paraffin Oil (Mineral Oil) is my first choice for use in french polishing because it doesn't dry like the traditional oil for this job, Linseed. This means that a job can be left at mid point for weeks on end and can be taken up where it was left off at any time where otherwise you would either have to finish the job or remove all the linseed from the surface before leaving it, or there would be a thin skin of oil on the surface when you return making it a pain in the but to pick up where you left off.
-
9th June 2003, 09:14 PM #26
The link that q9 gave as a reference to chemical names seems to answer many of the questions placed here:
" White spirit is a mixture of saturated aliphatic and alicyclic
C7-C12 hydrocarbons with a maximum content of 25% of C7-C12 alkyl aromatic hydrocarbons (Henriksen, 1980)........
Common synonyms:
Lacknafta (Sweden); Lakkibensiini (Finland);
Mineral Spirit; Mineral Turpentine; Mineralsk
Terpentin (Denmark); Mineralterpentin
(Sweden); Petroleum Spirits; Solvent Naphtha;
Stoddard Solvent; Terpentin (Denmark);
Testbenzin (Germany), Turpentine Substitute
(Henriksen, 1977; Hass & Prior, 1986; IARC,
1989a).
Common trade name:
B.A.S.; C.A.S.; Clairsol; Dilutine; Exxsol;
Halpasol; Hydrosol; Indusol; Sane;
Kristalloel; Laws; Ragia; Solfina; Sangajol;
Shellsol; Solfina; Solnap; Solvesso;
Spezialbenzin; Spirdane; Spraysol; Stoddard
Solvent; Supersol; Terpentina; Tetrasol;
Thersol; Varnolene; Varsol; W.S.; White
Spirit (CEFIC, 1989; IARC, 1989a).[B]
-
10th June 2003, 03:01 PM #27SENIOR MEMBER
- Join Date
- Jan 2003
- Location
- Osaka
- Posts
- 346
This back from the lab:
Mineral spirit is equivalent to petroleum spirits
Mineral turpentine is equivalent to mineral turps, etc, but there was a listing that said "mineral turps high aromatic white spirit"
White Spirit came up as mineral spirit/s, and low aromatic white spirit (turpentine substitute)
-
12th June 2003, 07:07 PM #28
Ok,I think your use of "turps" for a non-turpentine product confused me more than usual.
Now mineral oil,a petroleum based product considered non-toxic, can be purchased at woodworking stores here in the U.S. as
"Butcher Block Oil" or "Salad Bowl Finish"
for about $7-8 for 8 ounces or....
the same product can be purchased at a pharmacy
for $2 a quart as....brrrrrrrrrrrttt
a Laxative product.
Pays to be a smart shopper!!
Chiz.I Love The Smell Of Sawdust In The Morning,
It Smells Like....Victory!
-
12th July 2003, 09:47 AM #29Intermediate Member
- Join Date
- Jun 1999
- Posts
- 45
Mineral Spirits
I hope this helps...
Mineral Spirits is similar to Paint Thinners (not to be confused with Lacquer Thinners) both the MS and the PT are petroleum distilates .
The MS follows after Naptha in the distillation process, this means the MS will be slower drying because it containsa little more oil residue, allow you a little more open time for working out your stains, oils, glazes, ect.
If you cannot purchase MS, the Paint Thinner is your next best choice.
G'day, to those who may remember me.
Mac Simmons
-
12th July 2003, 09:56 AM #30
Now for the $64000 question.
What will mess your mind quicker.
a)drinking any or all of the above mentioned products
OR
b)trying to follow this thread???prove how bored u really are, ..... visit....... http://burlsburlsburls.freespaces.com/ my humble website
Bookmarks