



Results 1 to 8 of 8
Thread: water based stains
-
30th May 2003, 12:10 PM #1
water based stains
Does anyone know where Scan water based stains can be obtained? They were in powder form and I used them successfully for years when restoring furniture.
GRC
-
1st June 2003, 08:14 AM #2
To my knowledge they are no longer available in Australia and haven't been for a good few years now. They were an excellent product that unfortunately found a slot in the deepest darkest corner of the too hard basket for most Aussies.
Do a search of the finishing forum (and others if you have the time) using Scan, water stain, water dye, and similar key words and you may find more info. I seem to recall that a private individual was bringing some into Aus a few years ago and it was posted in one of the forums.
Hope this helps - Neil
-
5th June 2003, 08:26 PM #3
Malvern Paint and Timber Finishes had a small quantity of a few
cclours a few months ago. They are most helpful.
They are in Malvern Rd, Malvern, Vic, opp Darling Rd. I can't put my hand on their card at the moment but will post it when I find the card.
I am chasing some No71 Modern Brown if anyone comes across any.
The guy in Queensland who had some stock is Peter and phone no is 07 5478 9324 - give him a call as he had some colors when I spoke to him some months ago
Hope that helpsTom
"It's good enough" is low aim
-
18th June 2003, 11:33 AM #4
Try B&R fittings in Western Australia or J&A Watson in Victoria (they post anywhere).
-
18th June 2003, 08:18 PM #5
Have found address and phone no for B & R in WA.
Any idea where Watsons are in Vic as I cannot find any reference to that name in metropolitan phone books
ThanksTom
"It's good enough" is low aim
-
18th June 2003, 08:21 PM #6
Should have put numbers in for B& R in case anyone else wants them
Phone (08) 9381-5807
Fax (08) 9381-5304
Address Rear 278 Barker Rd
Subiaco 6008Tom
"It's good enough" is low aim
-
19th June 2003, 12:32 PM #7
Sorry for not giving enough detail. Watson have a great on-line catalogue too, but I'd stick to u-beat products if possible as they are local, not UK stuff which is much more expensive. Good for fittings though. I have onlly bought stains from B&R but believe Watson may stock them. J&A Watson are now calledWatsonBrass and they are in NSW not Victoria. Sorry for the confusion.
Visit: WatsonBrass.com email [email protected] POBox 265, Yamba NSW 2464
-
22nd June 2003, 08:43 AM #8
I promised to post phone no for Malvern Paint & Timber Finishes - it is (03) 9885-2883 for both phone and fax. Jason Payne is very helpful.
I spoke to B & R Fittings in Subiaco on Friday. They do not have Scan stain but have a water stain that sounds similar. They will sell small quantities eg 50G and are prepared to post.
Hope this helpsTom
"It's good enough" is low aim
Bookmarks