Results 1 to 12 of 12
Thread: Tip for silicon haters
-
7th December 2005, 12:07 PM #1
Tip for silicon haters
G'day.
This may be common knowledge for some so please excuse me if I'm telling you how not to suck eggs.
I know that silicon is the enemy of a spray finish.
I also know that most spray finishers won't allow it anywhere near their shed.
Did you know that silicon is used to waterproof leather work boots?
I bought a new pair of Blunstone work boots yesterday & I went for the waterproof/rural model & then I found out that the waterproofing is actually silicon. I didn't know that.
This won't bother Major Panic 'cos even though he uses spray finishes, he doesn't wear boots.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
7th December 2005, 04:45 PM #2
-
7th December 2005, 07:46 PM #3Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 0
Gee Cliff, I'm disappointed.
What's wrong with Dubbin or Neatsfoot?Cheers, Ern
-
7th December 2005, 08:59 PM #4Originally Posted by rsser
I only use my boots on the weekend & when it's raining up here, 5 days is a long time in the life cycle of a mould spore.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
7th December 2005, 09:07 PM #5
Best product of all for waterproofing boots (bar none) is NikWax.
-
7th December 2005, 10:05 PM #6
Boot treatment
I was told by one of those exteme mountain hiking type fellas that you should steer away from any type of organic coating for leather boots - esp around the stitching, he said that silicone based products were the way to go.
Something about bacteria and organic coatings and how the bacteria grow and flourish in warm leather and stitching helping them break down quicker.
He also specifically recommended steering clear of anything that had bees wax in it
I specifically steer clear of any sort of strenuous hiking to avoid the problem!
-
7th December 2005, 10:09 PM #7
Mould is a real problem in the tropics in the wet season....
everything goes mouldy.... ever had crutch rot?Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
7th December 2005, 10:22 PM #8
crutch rot
Cliff,
Luckily I still have use of both of my legs so I have no need for crutch.
I would have thought that you would have gone for a hardwood crutch to avoid those sort of problems up there in the humid tropics
-
7th December 2005, 10:57 PM #9
Crotch?
Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
8th December 2005, 12:04 AM #10Originally Posted by Cliff Rogers
Neatsfoot oil = oil made from a "Neat's (cow's) foot traditionally used for lubricant on oilstones . Will eventually rot the stitching.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
8th December 2005, 05:53 AM #11Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 0
Yeah, Nikwax is the go for hiking boots - esp. the emulsified wax version - but like them all, it uses solvents to keep the main agent soft and the solvent degrades the stitching over time.
That said, 'time' is a relative thing. I have a XC ski boot Nikwaxed to within an inch of its life and it's still going strong after 15 years. (I should have used Nikwax on my joints).Cheers, Ern
-
8th December 2005, 07:09 AM #12Originally Posted by Cliff Rogers
Boxer shorts made of cotton are the go.Cheers,
Craig
Similar Threads
-
Tip size for spraying lacquer?
By mag in forum FINISHINGReplies: 3Last Post: 20th November 2005, 10:53 PM -
Shane's Tip
By Shane Watson in forum FINISHINGReplies: 2Last Post: 20th November 1999, 06:27 PM -
Shanes Tip!
By Shane Watson in forum FINISHINGReplies: 4Last Post: 20th September 1999, 01:20 PM
Bookmarks