Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2005
    Location
    melbourne
    Posts
    8

    Default Plumbing Connundrum

    hello all, hope u can help , doing some tiling for a friend and she has asked if a showerbase could replace her currently tiled shower floor (hmmm)recessed into slab about 45mm shower floor is about 835 mm square.
    "waste grate" is centered, any ideas??????cheers

  2. #2
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    63
    Posts
    2,026

    Default

    Hazypond,
    You should be able to break the floor up around the waste enough so that you can slip a fitting on and extend the pipe up. Then you can fill the recess and plonk the showerbase on top. If the waste in the base doesn't line up with the pipe you can use a fitting called a "plumdinger" to get it right. There's probably a few others available now too.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

  3. #3
    Join Date
    Nov 2005
    Location
    melbourne
    Posts
    8

    Default thanks

    many thanks for your advice Mick! sounds achievable ,will let you know how i go. Have found simple/ useful plumbing advice the hardest of all to come by , think the code of reluctance emanates from the plumbers twilight zone aka the Reece Coffee Room cheers!

Similar Threads

  1. swimming pool plumbing
    By reybec in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 21
    Last Post: 10th July 2006, 07:21 PM
  2. Plumbing, Shower Tap & Rose Height?
    By Velophile in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 1
    Last Post: 14th September 2005, 09:51 AM
  3. Plumbing Cost Questions
    By spartan in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 0
    Last Post: 29th July 2005, 09:53 PM
  4. Free Plumbing Fittings (hint)
    By Christopha in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 5
    Last Post: 19th February 2005, 09:43 AM
  5. Question on plumbing – soft solder or silver solder or brazing
    By Theva in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 9
    Last Post: 16th August 2004, 09:40 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •