Colourbond fence - LED lights - clips?

[woodPixel]

Hi All, wisdom needed!

I have two lengths of outdoor LED lights, 50 metres each. I want to put them up on the new colourbond fences that surround the yard.

Make it festive!

Is anyone aware of a pre-made clips that will attach to the underside of the top lip of the colorbond rail that will allow the lights to hang nicely? Google seems to have nothing, nor AliExpress. I suspect Im using the wrong search terms, perhaps.

It was my intention to make some with fencing wire and a jig. The jig would allow me to wrap the wire into a premade shape... however, it means Ill need to make a few hundred.... easier buying them

Plastic is OK.

Examples of what I was thinking:




lights.jpg lights 3.jpg lights 2.jpg

[steve r]

Would the Xmas lights gutter clips work?


Sent from my iPhone using Tapatalk Pro

[warrick]

Try these

https://www.bunnings.com.au/arlec-en...-pack_p4351052

Rick

[woodPixel]

I find it quite odd there isn't a lighting clip for colourbond fences just for lights. It strikes me as kinda obvious....


Here are some designs I was thinking of. These were made by a company that is now closed (Big Green Leaf)

Id use 2mm or 3mm fencing wire and loop it around a jig to make them "wide".

They would be mighty useful for hanging things off the fence too....

clip3.jpg clip2.jpg

edit: these get sooooooooo close: https://www.christmaslightsetc.com/p...lips-Guide.htm

edit 2: Brick clips come close....

brickclip.jpg

[woodPixel]

IDEA: perhaps I could use cheap rare earth magnets. They would pop onto the fence. I could then use split washers to hang the wire into.

The magnets could be placed anywhere on the fence and wouldn't need to be strong as they are only holding up 60cm (or so) of thin wire....

The split washers could be forced apart a further 2mm to allow the wire to slip in, then the washer is simply put next to the positioned magnet... pop!!

[rwbuild]

Plastic spring load clothes pegs

[KBs PensNmore]

I'd look at chassis clips, they're designed to hold wiring in place on chassis of vehicles and trucks.Chassis clips.jpg
Should be able to get them from any Auto Parts store, or Auto electricians.
Hope this helps.
Kryn

[Kevin Chan]

your can use sheet steel fence lighting bracket that design to mount outdoor lamp on any sheet steel fence post with some hook or just cable tie to hold the festoon light, it cam mount various of objects. check this website www.fenceillme.com.au or just purchase it on ebay.

Hope can help.
fence bracket sample.jpgDSC_9527.jpg