Results 1 to 5 of 5
Thread: Hanging Vanity
-
28th June 2024, 12:15 AM #1SENIOR MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Posts
- 67
Hanging Vanity
Have pulled off our kitchen vanity to refinish it.
Curious, when hanging it back up, is it best to seal around top and sides with silicone to the tile wall to prevent possible moisture getting behind it from the walls when condensation builds up.
I have just installed a new extraction fan, so condensation is much less of an issue as previous, but still some.
Cheers
-
29th June 2024, 08:56 AM #2Senior Member
- Join Date
- May 2023
- Location
- Maroochydore
- Age
- 76
- Posts
- 137
-
29th June 2024, 11:28 AM #3Member
- Join Date
- Jun 2010
- Location
- SW Victoria
- Posts
- 96
"kitchen vanity"? Anyway...
Seal it the best you can, but condensation running down the walls needs to be addressed.
Perhaps a bigger extraction fan. More important is to make sure there is a gap/vent in the door or a window that allows the fan to move air freely
-
29th June 2024, 03:47 PM #4SENIOR MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Posts
- 67
Not thinking while typing. Bathroom Vanity.
Condensation issue is fixed as best as possible for a bathroom. The new fan does a great job at removing the steam quickly and is vented out the roof.
cheers
-
29th June 2024, 07:18 PM #5
Seal with silicone for water splash and spills.
If you think you need to protect the area behind the vanity from condensation you have other issues that need addressing first.
Similar Threads
-
Hanging villaboard
By cohunas in forum PLASTERINGReplies: 5Last Post: 5th October 2005, 10:17 PM
Bookmarks