Results 1 to 2 of 2
Thread: Flashing for new windows
-
13th June 2024, 09:07 AM #1
GOLD MEMBER
- Join Date
- Aug 2007
- Location
- St Georges Basin
- Posts
- 0
Flashing for new windows
I'm asking this for my daughter who has had a brick veneer wall cut out to install a big sliding door/window onto a new deck. There doesn't seem to be any flashing involved in the new installation, above or below, or to the sides. Is this the usual case?
-
13th June 2024, 06:25 PM #2
Senior Member
- Join Date
- Jun 2010
- Location
- SW Victoria
- Posts
- 101
Not normal. See example guides here
https://www.bradnams.com.au/professi...-installation/
But might be excused if set back several metres under a verandah or similar
Reply With QuoteSimilar Threads
-
Quick lesson needed in Flashing windows
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 15th March 2012, 10:30 AM -
Flashing and Installing New Wood / Timber Windows and door frames
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 12th October 2010, 12:10 AM -
Flashing for weatherboard house windows
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 9th September 2010, 11:20 PM -
Finishing flashing on replacement windows - current practice?
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 4th September 2009, 09:30 PM -
Flashing over exposed windows
By ubeaut in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etcReplies: 0Last Post: 16th November 2008, 07:18 AM
Bookmarks