![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Heat Transfer
-
2nd May 2024, 05:30 PM #1
Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,458
Heat Transfer
Hello.
How do you calculate the amount of heat generated on the opposite side of a plate you are welding to. All S355 plt.
For example, you are welding a 40x40x5 , 200mm long angle bar to a 100mm thk deck with a 6mm fillet using mig.
What is the max heat generated on the surface of the opposite side of the plate?
I need to know this to work out if the freshly coated paint on the other side would get damaged !!
Read the full thread at metalworkforums.com...