![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: 9-10mm trim
-
26th March 2024, 01:55 PM #1
Senior Member
- Join Date
- Nov 2010
- Location
- Woodford, Qld
- Posts
- 118
9-10mm trim
why is it that most of the trim around is 11mm thick? i need thinner trim that is 9-10mm thick. Any ideas folks?
-
26th March 2024, 03:10 PM #2
Wait a few years and it’ll be down that thin
used to be 1/2” was the thinnest, then 12mm now some is 11 with primer! What trim is it? You could ask the local joinery to run it off for you if you don’t have a thicknesser. Or you could plane it yourself with an electric planer.
-
27th March 2024, 12:49 PM #3
Senior Member
- Join Date
- Nov 2010
- Location
- Woodford, Qld
- Posts
- 118
thanks mic-d. me with an electric planer is a recipe for disaster. I am so lame and hopeless with the thing. It sits there, gleefully watching me when i go into my shed. Taunting me from the tool cupboard. I can hear it now ..." c'mon, just a little trim... you can do it this time....forget about the past...that index finger on your left hand was useless anyway...."
-
27th March 2024, 02:57 PM #4
GOLD MEMBER
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 287
10 x 15: Just a moment...
or
9 x 9: Just a moment...
-
27th March 2024, 08:05 PM #5