Need a workshop for resawing

[Storm2point0]

Hi everyone. I'm after a workshop to resaw 100x 50 Oregon into 100x 25mm. There are 80 lengths @ 4.8m long. They will be dropped off and picked up with a truck and Hiab. The job is in Sutherland NSW. So if I can get a workshop around there that would be beneficial. It's through my work so my boss would need to have an invoice for the works completed too. Thank you

Sent from my CPH2025 using Tapatalk

[johnpaine137]

I used to have timber yard in melbourne with suitable machines

- - - Updated - - -

I used to have timber yard in melbourne with suitable machines

[havabeer69]

something to think about is can you actually get the dimensions you want?

assuming they're "fairly" accurate as it, your going to loose blade kerf and depending on the machine will need to be cleaned up afterwards as well so getting to exact 25mm pieces may not work.