Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Ncstudio
-
20th February 2024, 01:22 PM #1Intermediate Member
- Join Date
- Aug 2008
- Location
- Peth
- Posts
- 32
Ncstudio
Good morning
Having a problem with my cnc router, it runs on NC studio V 5.4.53
The program started to freeze when I had finished a program, and the only way to shut it down was to turn the PC off manually
It now wont work at all, the computer works ok and responds to the program when it is running on the cnc
But unfortunately all the Axis's don't respond.
On checking the Controller card, when I turn the computer on the card led reads red.
Iam sure its a pirated copy, I have had it for over 9 Years, and has worked great, till now
Just wondering where the best place would be to purchase another card from.
Many thanks
Peter
-
20th February 2024, 05:11 PM #2Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,394
-
20th February 2024, 10:34 PM #3Intermediate Member
- Join Date
- Aug 2008
- Location
- Peth
- Posts
- 32
Lappa
Thank you for the advise.
Thinking this was what I was chasing.
Purchased and on its way
Many thanks
Peter