![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: First time tiler
-
16th January 2024, 05:22 PM #1
Senior Member
- Join Date
- Nov 2010
- Location
- Woodford, Qld
- Posts
- 120
First time tiler
What's the best/ easiest to use/easiest to clean adhesive to use on a laundry wall for a first time tiler?
Sent from my SM-A205YN using Tapatalk
-
16th January 2024, 05:55 PM #2
For a first time user I would probably go with a one pot mastic like Davco Supermastic. Any one-pot mastic are much the same, head to a tile shop and ask for their recommendation. If you had the mixing tool, I would use a powdered adhesive. The only one I use these days is Aba Powerstick Plus. I have used Mapei Keraflex and it is good too, but it is not white, which is a consideration for a new tiler if you are going to use a light colured/white grout. If you don't clean your grout lines scrupulously before grouting you'll end up with it looking mouldy from the start. So yeah, make sure it is a white adhesive. The two I recommended are white, both are easy to use. You might also get a bit more waste with the powdered one until you get your quantity estimation down pat.
-
17th January 2024, 10:34 PM #3
Senior Member
- Join Date
- Mar 2008
- Location
- Cairns
- Posts
- 219
just don't go tiling an area that will get wet regularly with that mastic stuff else ya tiles wont stay on the wall for too long.
Similar Threads
-
tiler
By opees in forum EMPLOYMENTReplies: 0Last Post: 15th May 2009, 01:17 PM -
Licensed Tiler looking for a job
By AlexM78 in forum EMPLOYMENTReplies: 1Last Post: 21st March 2009, 10:27 PM -
tiler perth
By metamorphesis in forum PAINTING, PLASTERING, TILING, DECORATING, etc.Replies: 0Last Post: 15th May 2008, 02:28 PM -
tiling by a non-tiler?
By SkyHook in forum TILINGReplies: 11Last Post: 22nd April 2008, 11:01 AM -
looking for Handyman and Tiler
By WillyInBris in forum EMPLOYMENTReplies: 2Last Post: 24th March 2008, 04:35 AM